Operating instructions

Operating Instructions
Continued
Cycle selector buttons
Option selector buttons
Cycle control knob
To add a dish after starting
1. To be sure the added item is washed and
rinsed, make sure the Cycle Control Knob has
not passed LIGHT WASH.
2. Lift up on the door latch to unlatch door and
stop the cycle. Don’t open the door until the
spray arms stop spinning.
3. Open the door and add the dish.
4. Close the door. Do not latch it. Wait 30
seconds for air in the drshwasher to warm up.
This helps reduce the amount of moisture that
can come from the vent when restarting the
cycle.
5. Press door in to latch it. The dishwasher will
start where It stopped.