Use and Care Manual

6. Let it sit for 30 minutes.
7. Remove the cleaning mixture from reservoirs by dispensing it from both taps into a
pitcher.
8. Wipe the inside of reservoir with a soft cloth.9. Fill the reservoir with 1 gallon tap water.
10. Remove the water from the reservoir by dispensing it from both taps into a pitcher.
11. Reattach bottle receptacle to this unit.
12. Install a fresh bottle of water after cleaning the bottle cap and neck area.
13. Repeat rinsing cycle if chlorine taste persist.
14. Plug the power cord into a grounded wall outlet.
Model # 7LIECK-W-WL: Page 13
IMPORTANT: Do NOT Return Dispenser To Store.
If you have a question or problem, please contact 1-855-5-WHIRL-5 for assistance.
Electrical shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
WARNING
Excessive Weight Hazard
Use two or more people to move and install the
water cooler and the bottles.
Failure to do so can result in back or other injury.
WARNING