Manual

Operating Instructions
Continued
The beeping sound
• Each time a control pad is pressed, a single
"beep” sound is made.
• A double beep means the wrong control pad has
been pressed.
• Three beeps sound at the beginning of the
drying part of a cycle.
• A longer “beep" sounds at the end of the drying
part of a cycle if the Heat Dry Option is used.
To turn off the beep:
T. Press and hold the hidden pad until the picture
of the speaker and "OFF" show on the display.
START / FAVORITE CANCEL
2. Release the pad.
NOTE: A power failure will reset this feature. You
will have to repeat the above steps.
To turn on the beep:
1. Press and hold the hidden pad until the picture
of the speaker and "ON" show on the display.
2. Release the pad.
START/FAVORITE
Using a favorite cycle
You can set the dishwasher to remember the cycle
and options you use most often.
To set your favorite cycle for the first time:
1. Press the START/FAVORITE pad or SET
FAVORITE pad. "SET FAVORITE" will show on
the display while the cycle and option names
flash on and off. (This will only happen If a favor
ite cycle has never been set ) After 30 seconds
the display will go out.