Manual

START / FAVORITE
2. Pressing the SET FAVORITE pad during
this 30 seconds will set the cycle and option
combination that is showing on the display
as your favorite cycle. “FAVORITE SET” will
be displayed.
Or you may wait until the display goes
out and:
3. Select your desired cycle by pressing the
CYCLE, OPTIONS, and/or DELAY pads.
4. Press the SET FAVORITE pad. The cycle
combination and “FAVORITE SET" will be
displayed. This is now your favorite cycle.
NOTE: Each step must be completed within 15
seconds of the previous step or the display will go
blank. If the display goes blank, repeat Steps 3
and 4.
To display your favorite cycle:
From a blank display press the SET FAVORITE
pad The display will show your favorite cycle.
To change your favorite cycle:
Repeat the above steps 3 through 4.
To start your favorite cycie:
Press START/FAVORITE.
The dishwasher will immediately start. If a delay is
part of the favorite cycle, the dishwasher will start
the delay countdown.
NOTE: The favorite cycle settings will be lost
during a power failure. Repeat the steps under
“To set your favorite cycle for the first time”
to reset your favorite cycle.
The status indicators
The status indicators let you know what your
dishwasher is doing during a cycle.
The eiectronic display
The electronic display shows:
NORMAL
ADD A DISH
WASHING
i i MINUTES
G G
' The number of minutes remaining in a cycle. The
actual time remaining in the cycle may be longer
than what's displayed if the dishwasher must
heat water during a cycle. (See “The PAUSE
HEAT indicator” on page 10.)
' The number of delay hours selected.
u
DELAY HRS