Ttkl 2 01 Use& d;e %uick Removable Control panel I Adjustable I air discharge AIR CONDITIONERS ACH082 ACH102 ACH122 ACH184
Contents Page .. .. . ... .. .. . ... .. .. . .. .. 2 Important Safety Instructions Operating Instructions . . .. . .. ... . .. ... ..._................ 3 Starting yo.ur air conditioner .; .. .. ... .. .. ... .. .. ... .. ... 3 The exhaust vent control ..-.. .. .. . .. .. ... .. .. ... .. 1.:.. .. . 4 Changing air direction .. .. .. .. . .. .. ... .. .. ... .. ... .. .. ... .. 4 . . .. .. ... .. .. ... .. .. ... 4 Cleaning Your Air Conditioner Cleaning the front panel . . .. .. ... . . .. ... .. .. .... . .
Operating.lnstructions Starting your air conditioner Electrical Shock Hazard Plug unit only into grounded electrical outlet. l Do not use an extension cord. l Do not operate unit with front removed. Failure to follow the above precautions could result in electrical shock or personal injury. l 1. Set Exhaust Vent Control to CLOSED for maximum cooling or heating. 2. Set Fan Speed Control to the desired setting. For cooling, use one of the COOL settings. For heating, use one of the HEAT settings. HI .. ..
Operating Continued Instructions The exhaust vent control The Exhaust Vent Control setting draws stale or smoky air from the room. .l. To exhatist room air. Set Exhaust Vent Control to OPEN. For cooling, set Fan Speed Control to one of the COOL settings. For heating, set Fan Speed Control to one of the HEAT settings. ff no cooling or heating is desired, use the FAN ONLY setting. 2. To circulate rcom air: Set Exhaust Vent Control to CLOSED. For cooling, set Fan Speed Control to one of the COOL settings.
Cleaning the front panel Screw 1. Unplug power cord. 2. Remove the front panel from unit when cleaning. Remove two screws from bottom edge of front panel. 3. Lii the front panel up and toward you. 4. Remove slideout filter and clean separately. (See “Cleaning the filter” below.) NOTE: Front does not have to be removed to clean fifter. 5. Clean front panel with warm water and mild soap or detergent. Use a soft cloth. Rinse and dry. Replace front panel. 6. wipe control panel clean with a soft, dry cloth.
C&ii:: Your Air Conditioner Electrical Shock, Product Damage and Personal Injury Hazard l Unplug Power cord from receptacle before performing any maintenance. Be sure no liquid gets into the motor, electrical control box or compressor electrical terminals. l Do not lift, push or pull any white beaded foam (expanded polystyrene) parts.
If YouNeedServiceOrAssistance We suggest you follow these steps: 1. Before celling for assistance .. . Performance problems often resutt from little things you can find end fix yourself without tools of any kind.
WHIRLPOOL” RoomAir ConditionerWarranty LENGTH OF WARRANTY WHIRLPOOL FULL ONE-YEAR WARRANTY From Date of Purchase FSP replacement parts and repair labor to correct defects in materials or workmanship. FULL FIVE-YEAR WARRANTY From Date of Purchase FSP replacement parts and repair labor to correct defects in materials or workmanship in the sealed refrigeration system These parts are: 1. Compressor 4. Drier-Strainer 5. Connecting Tubing 2. Evaporator 3.
