Instruction for Use

22
19
Position of hood
20 mm +/- 3
HOOK
Masonary
plug
Wall
chain tilt
SECURING THE COOKER TO WALL
(g.19)
Note:- The installation of the chain provided
is for safety reasons, it must be installed as
indicated below.
To prevent the cooker tipping forwards in the
event of children standing on the oven door or
where users put extreme weight on the door
when in open position, two chains MUST BE
xed to the back of the oven which should at
all times be secured to the threaded pins. The
threaded pins should be secured to the wall at
the back of the cooker.
Assembly instructions • Secure threaded pins
into wall immediately behind and to the left-
hand side about 770 mm from the oor.
Finished xing the chains must be stretched
INSTRUCTIONS FOR THE INSTALLER
GAS CONNECTION
Before connecting the appliance check that
the data on the rating plate axed to the
cooker, correspond to those of the gas mains.
A label on the back of this handbook and at
the back of the cooker gives the appliance
adjustment conditions, that is, the type of
gas and operating pressure.
Once the cooker is installed, check there are no
leaks using a soapy solution (never a ame).