Manual

Attach Support Legs
1. Determine the correct slots on the tray side from the type of
exterior construction of the building.
Thin Wall Construction (vinyl, wood, etc.)
A
A. First and second slots
Thick Wall Construction (brick}
A
o
A. Second and third slots
2. Insert carriage bolt up through slot on tray-frame side and
support leg.
3. Place one end of tray center over carriage bolt.
4. Then place flat washer, lock washer and hex nut.
NOTE: Do not tighten. The leg must be able to move freely to
adjust angle when installed.
.......A
,, _s,, y,, C
......iii:ii:...........
A. Hex nut D. Tray center
B. Lock washer E. Carriage bolt
C. Flat washer
5=
Insert second carriage bolt through tray side and attach other
end of support leg.
NOTE: Do not tighten. The leg must be able to move freely to
adjust angle when installed.
......A
..........
_D
A. Hex nut C. Flat washer
B. Lock washer D. Carriage bolt
6. Install support leg on other side.
Install SMART-MOUNT _ Tray Assembly in Wall Opening
1. From inside, place SMART-MOUNT_tray, support legs facing
down, in the wall opening. Match the holes in tray side with
the predrilled holes in wall opening.
12