ENGLISH Instructions for use DEUTSCH Bedienungsanleitung FRANÇAIS Mode d’emploi NEDERLANDS Gebruiksaanwijzing ESPAÑOL Instrucciones de uso PORTUGUÊS Instruções de utilização ITALIANO Istruzioni per l’uso ΕΛΛΗΝΙΚΑ Οδηγίες χρήσης SVENSKA Bruksanvisning SUOMI Käyttöohje NORSK Bruksanvisning DANSK Brugervejledning POLSKI Instrukcja obsługi ČESKY Návod k použití SLOVENSKY Návod na používanie MAGYAR Használati útmutató ROMÂNĂ Instrucţiuni de utilizare БЪЛГАРСКИ Инструкции за употреба РУССКИЙ Инструкции по пользов
IMPORTANT SAFETY INSTRUCTIONS • C-Pentane is used as blowing agent in the insulation foam and it is a flammable gas. Pay special attention during disposal operations. • Your new appliance is for commercial use, and has been designed to deliver outstanding performance and safe, efficient operation. • Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
• Plug the appliance into a • Installation and maintenance grounding socket: the appliance including replacement of the must be correctly connected to an supply cord must be carried out approved earthing system. by the manufacturer or a qualified • Do not use single/multi adapters technician, in compliance with or extension cords. the manufacturer’s instructions and the local safety regulations in • During installation, make sure the force.
BEFORE USING THE APPLIANCE 2. Wait at least two hours before switching the appliance on, to ensure that the refrigerant circuit is fully efficient. 3. Clean the inside of the appliance before using it. To ensure best use of your appliance, carefully read the operating instructions which contain a description of the product and useful advice. Keep these instructions for future reference. 1. After unpacking the appliance, make sure it is not damaged and that the door closes properly.
ENERGY-SAVING TIPS • Install the appliance in a dry, well ventilated room far away from any heat source (e.g. radiator, cooker, etc.) and in a place not exposed directly to the sun. If required, use an insulating plate. • To guarantee adequate ventilation follow installation instructions. • Insufficient ventilation on back of the product increases energy consumption and decreases cooling efficiency.
WHIRLPOOL EUROPE s.r.l. - Viale Guido Borghi, 27 - 21025 COMERIO (Varese) ITALY WHIRLPOOL EUROPE s.r.l. - Viale Guido Borghi, 27 - 21025 COMERIO (Varese) ITALY WHIRLPOOL EUROPE s.r.l. - Viale Guido Borghi, 27 - 21025 COMERIO (Varese) ITALY Вирлпул Юроп с.р.л. - Виале Гвидо Борги, 27 - 21025б Комерио (Варезе) ИТАЛИЯ WHIRLPOOL EUROPE s.r.l. - Viale Guido Borghi, 27 - 21025 COMERIO (Варез) ИТАЛИЯ Вірпул Юроп с.р.л. – Віалє Г. Боргі, 27, 21025 - Комеріо (Варезе), Італія” Завод: Вирлпул Юроп с.р.л.