Manual

A
A. #8 x _" pan-head screw
6. While the right-hand curtain is still extended, insert screws
into top and bottom slots of curtain. Using #8 x %" pan-head
screws, screw curtain to the top and bottom holes in air
conditioner cabinet.
7. Slide curtain housing into guides as far as it will go.
8. Repeat above steps for left-hand curtain.
• Handle air conditioner with care.
• Be sure your air conditioner does not fall out of the opening
during installation or removal.
• Do not block the louvers on the front panel.
• Do not block the louvers on the outside of the air conditioner.
2.
If window sash does not close flush against rear
surface of top channel, remove air conditioner and
adjust SMART-MOUNT TM tray until window sash closes
flush against rear surface of top channel.
Correct installation
B
C
A. Window sash
B. Topchannel
C.Air conditioner
If your air conditioner looks like either of the illustrations in the
"Incorrect installation" graphic, SMART-MOUNT _tray needs
adjustment.
Incorrect installation
Excessive Weight Hazard
Use two or more people to move and install
air conditioner.
Failure to do so can result in back or other injury.
Put air conditioner on SMART-MOUNT TM tray. Check that feet
on bottom of air conditioner are behind and against back side
of windowsill. Lower window sash.
B
A. Window sash
B. Top channel
C. Air conditioner
3.
If the bottom of the air conditioner does not sit against the
bottom of the SMART-MOUNT TM tray, remove air conditioner
and adjust angle of tray until air conditioner sits against the
bottom of the tray.
0
A. Window sash
B. Feet on bottom of air conditioner
behind back side of windowsill
A. Air conditioner sitting on SMART-MOUNT" tray
B. SMART-MOUNT" tray