THROUGH-THE-WALL AIRCONDITIONER Use & Care Guide

Electrical Requirements
Below are electrical plug variations, choose the
one which matches the ampere rating of your
unit. Your model’s ampere rating is printed on the
model and serial number label, attached to the
unit, behind the front panel. (See diagram on
we 2.)
OBSERVE ALL LOCAL CODES AND
ORDINANCES.
DO NOT, UNDER ANY CIRCUMSTANCES,
REMOVE THE POWER SUPPLY CORD
GROUNDING PRONG.
NOTE: If codes permit and a separate grounding
wire is used, it is recommended that a qualified
electrician determine that the grounding path is
adequate and not interrupted by plastic, non-
metallic gaskets or other insulating materials.
Fire Hazard
Do not use an extension cord.
Doing so can result in death, fire, or
electrical shock.
I
Electrical Shock Hazard
1 Plug into a grounded three prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not fuse neutral or grounding circuit.
I
Do not use air conditioner with front
panel removed.
Failure to follow these instructions can
result in death, electrical shock, or
serious injury.
PLUG TYPE
I
3.prong
groufling plug
Power supply cord
ELECTRICAL REQUIREMENTS
115 volt models with amperes up
through 7.5
- 3.prong
grounding
type wall
receplacle
Power s”&~ly cord
For 115 volt models with amperes
from 7.6 to 12.0
I
‘K blade -
Receptacle
I
tandem
\-
blades
Grounding
Prong
230/208 volt models with amperes
up through 12.0
SEE PAGE
4
5
6