® DEHUMIDIFIER Use & Care Guide For questions about features, operation/performance, parts, accessories or service call: 1-800-253-1301 or visit our website at... www.whirlpool.com In Canada, call for assistance, installation and service, call: 1-800-807-6777 or visit our website at...www.whirlpool.
TABLE OF CONTENTS DEHUMIDIFIER SAFETY ...............................................................2 INSTALLATION REQUIREMENTS ................................................3 Electrical Requirements ...............................................................3 Location Requirements ................................................................3 DEHUMIDIFIER USE ......................................................................4 Setting the Controls (Control Types 1 and 2 Only)..................
INSTALLATION REQUIREMENTS Electrical Requirements Location Requirements WARNING Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. A Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. Specific electrical requirements are listed in the chart below. Follow the requirements for the type of plug on the power supply cord. Power supply cord Wiring requirements ■ 115 volt (103.5 min.
DEHUMIDIFIER USE Setting the Controls (Control Types 1 and 2 Only) WARNING Starting/Stopping the Dehumidifier NOTE: Before turning on the dehumidifier, be sure that the bucket is empty and fits all the way into the dehumidifier. Control Type 1 NOTES: ■ Minimum operating temperature is 65ºF (18ºC) for model AD25B. Electrical Shock Hazard Plug into a grounded 3 prong outlet. Minimum operating temperature is 55ºF (13ºC) for model AD25D. ■ A Do not remove ground prong. Do not use an adapter.
Setting the Controls (Control Types 3 and 4 Only) WARNING Starting/Stopping the Dehumidifier NOTES: ■ Before turning on the dehumidifier, be sure that the bucket is empty and fits all the way into the dehumidifier. ■ Each time you unplug the dehumidifier or power is interrupted, the control will return to your previous settings when power is restored. Electrical Shock Hazard Control Type 3 Plug into a grounded 3 prong outlet. NOTE: Minimum operating temperature is 38ºF (3ºC).
■ Max Dry—Will operate the dehumidifier at the selected fan speed until the humidity levels are lowered to the maximum level. ■ Continuous Run—Will operate the dehumidifier continuously at the selected fan speed regardless of humidity level. The dehumidifier will turn off only if the bucket is full or removed. Desired Humidity 1. Press DESIRED HUMIDITY to select the desired humidity setting. 2. Choose Normal, Dry, Max Dry or Continuous Run.
Option 2—Connect Drain Hose If you plan to run your dehumidifier continuously, you may want to attach a garden hose to the drain hose connector. 1. Use a flat-blade screwdriver to gently pry out the drain hose connector cover. Discard the cover. 4. Place the other end of garden hose into a floor drain. Check to see that the hose lies flat and is in the drain. 5. Reinstall bucket. A NOTES: To use the bucket without the garden hose, remove the garden hose. Then reinstall bucket. ■ B ■ A.
DEHUMIDIFIER CARE Your new dehumidifier is designed to give you many years of dependable service. This section tells you how to clean and care for your dehumidifier. Call your local authorized dealer for an annual cleaning of the dehumidifier. Cleaning the Air Filter (on some models) The air filter is removable for easy cleaning. A clean filter helps remove dust, lint, and other particles from the air and is important for best operating efficiency.
TROUBLESHOOTING Before calling for service, try the suggestions below to see whether you can solve your problem without outside help. Dehumidifier will not run ■ Is the dehumidifier turned on? Turn on dehumidifier. Ice forms on coils ■ Model AD25B dehumidifiers do not have an automatic deicer. See model and serial number label for model number. If ice forms on coils, unplug dehumidifier until ice melts and room temperature rises.
ASSISTANCE OR SERVICE Before calling for assistance or service, please check “Troubleshooting.” It may save you the cost of a service call. If you still need help, follow the instructions below. When calling, please know the purchase date and the complete model and serial number of your appliance. This information will help us to better respond to your request. If you need replacement parts If you need to order replacement parts, we recommend that you use only FSP® replacement parts.
Please record your model's information. Whenever you call to request service on your appliance, you need to know your complete model number and serial number. You can find this information on the model and serial number label. The model and serial number label is located on the wall behind the water bucket. Please record the model and serial number information below. Also, record the purchase date of your appliance and the store's name, address, and telephone number.
SEGURIDAD DEL DESHUMIDIFICADOR Su seguridad y la seguridad de los demás es muy importante. Hemos incluido muchos mensajes importantes de seguridad en este manual y en su electrodoméstico. Lea y obedezca siempre todos los mensajes de seguridad. Este es el símbolo de advertencia de seguridad. Este símbolo le llama la atención sobre peligros potenciales que pueden ocasionar la muerte o una lesión a usted y a los demás.
REQUISITOS DE INSTALACIÓN Requisitos eléctricos Requisitos de ubicación ADVERTENCIA Peligro de Choque Eléctrico Conecte a un contacto de pared de conexión a tierra de 3 terminales. No quite la terminal de conexión a tierra. A No use un adaptador. A. Deje por lo menos de 12" a 18" (30,5 a 45,7 cm) de espacio para el aire. No use un cable eléctrico de extensión. No seguir estas instrucciones puede ocasionar la muerte, incendio o choque eléctrico.
CÓMO USAR EL DESHUMIDIFICADOR Ajuste de los controles (Sólo para modelos con controles tipo 1 y 2 ) Encender/Apagar el deshumidificador ADVERTENCIA NOTA: Antes de encender el deshumidificador, asegúrese de que el balde esté vacío y debidamente insertado en el deshumidificador. Control tipo 1 NOTAS: ■ Temperatura mínima de funcionamiento 65ºF (18ºC) para el modelo AD25B. Peligro de Choque Eléctrico Conecte a un contacto de pared de conexión a tierra de 3 terminales.
Dryness Control (Control de sequedad) El Dryness Control (Control de sequedad) controla la cantidad de humedad en la habitación. Gire la perilla de control en la dirección de las manecillas del reloj para mayor sequedad. Gire la perilla de control en dirección contraria a las manecillas del reloj para menor sequedad. Gire la perilla de control hasta “Dry” (Seco) para mantener condiciones de humedad media.
Velocidad de ventilación (Sólo para modelos con control tipo 3) 1. Oprima FAN (ventilación) para seleccionar la velocidad de ventilación. 2. Seleccione Low (bajo), High (alto) o Auto (automático). ■ Low—Alcanzará más lentamente el nivel de humedad deseado con un nivel de sonido más bajo. ■ ■ High—Alcanzará más rápido el nivel de humedad deseado.
3. Vierta el agua a través de la abertura en un fregadero o tina. 2. Quite el balde. 3. Conecte una manguera de jardín al conector de la manguera de desagüe en la parte interior del deshumidificador. Apriete con la mano. A B 4. Vuelva a colocar el balde. IMPORTANTE: Si la luz de Empty/Adjust Bucket (Vacíe/ Ajuste el balde) se enciende, el deshumidificador no funcionará. Vacíe o coloque bien el balde.
CUIDADO DEL DESHUMIDIFICADOR Su nuevo deshumidificador está diseñado para darle muchos años de servicio confiable. Esta sección le ofrece la información acerca de la limpieza y el cuidado de su deshumidificador. Llame al vendedor autorizado de su localidad para una limpieza anual del deshumidificador. Limpieza del filtro de aire (en algunos modelos) El filtro de aire se puede desmontar para facilitar su limpieza.
SOLUCIÓN DE PROBLEMAS Antes de solicitar servicio, pruebe las sugerencias que se incluyen a continuación para ver si puede resolver el problema sin ayuda. El deshumidificador no funciona ■ ¿Está encendido el deshumidificador? Encienda el deshumidificador. Se forma hielo en los serpentines ■ Los deshumidificadores de modelo AD25B no tienen un deshelador automático. Vea la etiqueta con el número del modelo y de la serie para obtener el número de modelo.
AYUDA O SERVICIO TÉCNICO Antes de solicitar ayuda o servicio técnico, por favor consulte la sección “Solución de problemas”. Esto le podría ahorrar el costo de una visita de servicio técnico. Si considera que aún necesita ayuda, siga las instrucciones que aparecen a continuación. Cuando llame, tenga a mano la fecha de compra y el número completo del modelo y de la serie de su electrodoméstico. Esta información nos ayudará a atender mejor a su pedido.