Manual

ControlC
.. _ates _ebucketis
OR
_ebucketisnotinpo_,3tion
J
selectsmode
"" adjustshumidityremovalsetpoint
(_nour_ofmois_eremovedfTomroom)
TOTURNDEHUMIDIFIERON:
Pressthe ON/OFFbutton. All lightswill
flash once. If the Empty/Adjust Bucket
light comes on, the dehumidifier will not
operate. Empty or adjust bucket.
Each time you unplug the dehumidifier
or power is interrupted, the control will
return to your previous settings.
MODESELECTION
Press MODE button to select fan speed.
Choose LOW, HIGH, CONTINUOUS or
AUTO DRY.
If you have selected LOW or HIGH:
Press 4 or I, to set the amount of
moisture you want removed. Pressing !_
increases the amount of moisture
removed; pressing 4 decreases the
amount of moisture removed.The
indicator light will change according to
the number of times you press 4 or I,.
If you have selected CONTINUOUS:
You cannot change the amount of
moisture you want removed.
Pressing 4 or !_will not increase or
decrease the amount of moisture
removed.
If you have selected AUTO DRY:
Press 4 or I, to set the amount of
moisture you want removed. The
dehumidifier will automatically adjust
fan speed andlor turn on and offto
maintain your setting.
TOTURNDEHUMIDIFIEROFF:
Press the ON/OFF button.The
dehumidifier will retain your last
settings.
EMPTY/ADJUSTBUCKETlight
If this light is on, the dehumidifier is not
running. This light indicates that you
need to check
• If the bucket is full, empty bucket and
replace.
• If the bucket is not in position,
remove bucket and replace. Make
sure the bucket fits all the way into the
dehumidifier and the light is off,
or dehumidifier will not run.