DEHUMIDIFIER Use & Care Guide For questions about features, operation/performance, parts or service, call: 1-877-465-3566.
TABLE OF CONTENTS DEHUMIDIFIER SAFETY....................................................3 INSTALLATION REQUIREMENTS.....................................4 Electrical Requirements..................................................4 Location Requirements...................................................4 DEHUMIDIFIER USE...........................................................5 Setting the Controls.........................................................5 Draining the Dehumidifier...........................
DEHUMIDIFIER SAFETY Your safety and safety of others are very important We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol with the word “DANGER” or “WARNING” These words mean: You can be killed or seriously injured if you don’t immediately follow instructions.
INSTALLATION REQUIREMENTS Electrical Requirements Recommended Grounding Method This dehumidifier must be grounded. This dehumidifier is equipped with a power supply cord with a three-prong grounding plug. The cord must be plugged into a mating, grounded three-prong outlet, grounded in accordance with all local codes and Electrical Shock Hazard WARNING Plug into a grounded three-prong outlet. ordinances.
DEHUMIDIFIER USE Setting the Controls Control Panel 1. Plug into a grounded three-prong outlet. 2. Press POWER to turn on the dehumidifier. 3. Press FAN to choose the fan speed. 4. Press MODE to choose the mode. 5. Press the plus or minus arrow button to choose the level of humidity. 6. Press POWER to turn off the dehumidifier. WATER FULL AUTO AUTO HIGH CONTINUOUS LOW NORMAL POWER FAN MODE P TIMER IONIzER PUMP FILTER MONITOR H EAT NOTE: The dehumidifier will retain your last settings.
■ Desired Humidity For heat function model, when the dehumidier operaties . in heat mode, the display shows the room temperature. Press MODE to select the desired humidity setting. NOTE: 2. Choose Auto Dry, Continuous or Normal. ■ The humidity displayed is only for reference. For accurate humidity, Auto Dry: Will operate the dehumidifier only in the dry mode. please check a hygrometer. Auto Fan Speed is set automatically. The Desired Humidity is set to 50% automatically.
1. Press PUMP to activate the pump system for active drainage. Filter Monitor 2. Once the pump button is pressed, the pump light will switch on. 1. When Filter Monitor indicator light is lit, remove, clean and replace air filter. See “Cleaning the Air Filter”. NOTE: 2. Press FILTER MONITOR after cleaning and replacing the air filter. This resets the filter monitor ■ If the pump light flashes, it means that the pump is not functioning properly.
Draining the Dehumidifier 4. Replace the handle ,and reinstall bucket. Option 1 Remove Bucket IMPORTANT: If you floor drain is not available, or you do not plan to run your If the Water full light comes on, the dehumidifier will not operate. Empty or adjust bucket. dehumidifier continuously, you may want to simply empty the bucket. 1. Grasp the bucket sides to slide out bucket.
1. How to connect drain hose to the unit. 3.Place the other end of garden hose into a floor drain. Push drain hose connector B into the connector A. Check to see that the hose lies flat and is in the drain. NOTES: ■ To use the bucket without the garden hose, remove the the garden hose. Then reinstall bucket. ■ The bucket must be installed and properly aligned for the the dehumidifier to operate with or without a garden hose 2. How to disconnect drain hose. connected.
DEHUMIDIFIER CARE Your new dehumidifier is designed to give you many years of dependable service. This section tells you how to clean and care for your dehumidifier. Call your local authorized dealer for an annual cleaning of the dehumidifier. Remember...the cost of this service call is your responsibility. Cleaning the Air Filter The air filter is removable for easy cleaning. A clean filter helps 4.
TROUBLESHOOTING Before calling for service, try the suggestions below to see whether you can solve your problem without outside help. Dehumidifier runs but does not dehumidify Dehumidifier will not run ■ ■ Is the dehumidifier turned on? All models have an automatic de-icer that will shut off the compressor and allow the fan to run. Turn on the dehumidifier. When the de-icer senses the correct operating temperature, the compressor will cycle back on.
ASSISTANCE OR SERVICE Before calling for assistance or service, please check “Troubleshooting.” It may save you the cost of a service call. If you still need help, follow the instructions below. When calling, please know the purchase date and the complete model and serial number of your appliance. This information will help us to better respond to your request. You can find this information on the model and serial number label.
DEHUMIDIFIER SAFETY Su Seguridad y la de los demás es muy importante Hemos incluido muchos mensajes importantes de seguridad en este manual y en el mismo equipo. Por favor lea y obedezca siempre todos los mensajes de seguridad. Este es el símbolo de aviso de seguridad. Este símbolo le advierte de los riesgos potenciales que pueden matar o lastimar a Usted o a otros.
REQUERIMIENTOS DE INSTALACION Requerimientos eléctricos ADVERTENCIA Método recomendado de conexión a tierra Este deshumidificador debe estar conectado a tierra. Este deshumidificador tiene un cable de alimentación con un enchufe de tres terminales. El cable debe conectarse con el correspondiente tomacorriente puesto a tierra, conforme a los códigos y ordenamientos locales.
USO DEL DESHUMIDIFICADOR Ajuste de Controles Panel de Control 1. 2. 3. 4. 5. LLENO WAT ER FULLAGUA / RÉ SER. PLEIN AUTOMATICO AUTO CONTINUO CONTINU. LOW /BAJO FAIBLE NORMAL NORMAL POWER ENCENDIDO / ALIM. FAN VENT / VENT. P AUTO AUTOMATICO HIGH ALTO / É LEVÉ MODO MODE TIMER RELOJ / MINUT. PUMP BOMBA / POMPE Conéctelo a una salida a tierra de tres postes. Oprima POWER para encender al deshumidificador.
■ En un modelo con la función de calor, cuando el deshumidificador opera en modo calor, la pantalla muestra la Humedad Deseada 1. Oprima MODE para seleccionar la humedad deseada. 2. Seleccione Auto Dry, Continuous o Normal. NOTA: La humedad mostrada es únicamente un ejemplo.. Para una medición de humedad exacta, use un higrómetro. ■ Auto Dry: El deshumidificador funciona solamente en éste modo. Auto Fan Speed se ajusta. automáticamente. La humedad deseada está ajustada en 50%.
Monitor del Filtro 1. Oprima PUMP para activar el sistema de bombeo para un drenaje activo. 1. Cuando se enciende la luz del Monitor del Filtro, remuévalo, límpielo y colóquelo nuevamente. Ver “Limpiando el Filtro de Aire“. 2. Oprima FILTER MONITOR después de limpiar y sustituir el filtro. Esto restablece al monitor 2. Una vez oprimida la tecla de la bomba la luz de la bomba se encenderá.. NOTA: Cuando la luz está encendida, así permanecerá por 180 horas o hasta que oprima FILTER MONITOR.
Drenando el deshumidificador 4. Baje la manija y reinstale la cubeta. ADVERTENCIA Peligro de enfermedad No beba el agua acumulada en la cubeta. Hacerlo puede ocasionar r enfermedad. Opción 1 Quite la cubeta de agua Si no tiene disponible un drenaje en el piso, o si no planea usar el deshumidificador de manera constante, puede simplemente vaciar la cubeta. IMPORTANTE: Si la luz de Agua llena se enciende, el deshumidificador no funcionará. Vacíe el agua y reacomode la cubeta. 1.
1. Cómo conectar la manguera de drenaje a la unidad. 3. Ponga el otro extremo de la manguera de jardín en un drenaje en el piso. Revise que la manguera este extendida y dentro del drenaje. Empuje el conector B de la manguera de drenaje dentro del conector A NOTAS: ■ Para usar la cubeta sin la manguera, quite la manguera. Luego reinstale la cubeta. ■ La cubeta debe ser instalada correctamente para que el deshumidificador funcione con o sin la manguera conectada.
MANTENIMIENTO DEL DESHUMIDIFICADOR Su nuevo deshumidificador fue construido para proporcionarle un servicio confiable durante muchos años. En ésta sección se indica como limpiar y mantener su deshumidificador. Llame a su distribuidor autorizado l para obtener un servicio de limpieza anual. Recuerde que el costo de la llamada de servicio es bajo su resposabilidad. Limpiando el Filtro de Aire El filtro de aire es removible para una fácil limpieza.
BUSCANDO SOLUCIONES Antes de llamar al servicio, revise estas sugerencias para ver si Usted puede resolver el problema sin ayuda externa. El deshumidificador funciona pero no deshumidifica No funciona el deshumidificador ■ ¿Esta prendido el deshumidificador? Encienda el deshumidificador. ■ Todos los modelos cuentan con un descongelador automático que apaga al compresor pero permite que funcione el ventilador.
ASISTENCIA O SERVICIO Antes de llamar para solicitar asistencia o servicio, favor de revisar “Buscando soluciones “.Le puede ahorrar el costo de la llamada a servicio. Si aún necesita ayuda, favor de seguir las siguientes instrucciones. Cuando llame, tenga a mano la fecha de compra, el número completo del modelo y el número de serie de su aparato. Con ésta información nos ayudará para darle un mejor servicio.