Instruction for Use

ManualsBrandsWhirlpool ManualsDishwashersADG 1077

READ ALL THE INSTRUCTIONS BEFORE USING

When using your dishwasher, follow the

precautions listed below:

GROUNDING INSTRUCTIONS

• This appliance must be grounded. In the event of a

malfunction or breakdown, grounding will reduce

the risk of anelectric shock by providing a path of

least resistance of electric current. This appliance

is equipped with a cord having an equipment-

grounding conductor and a grounding plug.

• The plug must be plugged into an appropriate

outlet that is installed and grounded in

accordance with all local codes and ordinances.

Improper connection of the equipment-grounding

conductor can result in the risk of an electric shock.

• Check with a qualified electrician or service

representative if you are in doubt whether the

appliance is properly grounded. Do not modify

the plug provided with the appliance; If it does

not fit the outlet. Have a proper outlet installed

by a qualified electrician.

PROPER USE

• Do not abuse, sit on, or stand on the door or

dishrack of the dishwasher.

• Do not operate your dishwasher unless all

enclosure panels are properly in place. Open the

door very carefully if the dishwasher is

operating, there is a risk of water squirting out.

• Do not place any heavy objects on or stand on

the door when it is open. The appliance could

tip forward.

• When loading items to be washed:

1) Locate sharp items so that they are not likely

to damage the door seal;

2) Warning: Knives and other utensils with sharp

points must be loaded in the basket with their

points down or placed in a horizontal position.

• When using your dishwasher, you should prevent

plastic items from coming into contact with the

heating element. (This instruction is only

applicable to machines with a visual heating

element.)

• Check that the detergent comparment is empty

after completion of the wash cycle.

• Do not wash plastic items unless they are

marked dishwasher safe or the equivalent. For

plastic items not so marked, check the

manufacturer's recommendations.

• Use only detergent and rinse additives designed

for an automatic dishwasher.

• Never use soap, laundry detergent, or hand

washing detergent in your dishwasher. Keep

these products out of the reach of children.

• Keep children away from detergent and rinse

aid, keep children away from the open door of

the dishwasher, there could still be some

detergent left inside.

• This appliance is not intended for use by persons

(including children) with reduced physical,

sensory or mental capabilities, or lack of

experience and knowledge ,unless they have

been given supervision or instruction concerning

use of the appliance by a person responsible for

their safety.

• Children should be supervised to ensure that

they do not play with the appliance.

• Dishwasher detergents are strongly alkaline, they

can be extremely dangerous if swallowed. Avoid

contact with skin and eyes and keep children away

from the dishwasher when the door is open.

• The door should not be left open, since this

could increase the risk of tripping.

• If the supply cord is damaged, it must be

replaced by the manufacturer or its service agent

or a similarly qualified person in order to avoid a

hazard.

• Remove the door to the washing compartment

when removing an old dishwasher from service

or discarding it.

• Please dispose of packing materials properly.

• Use the dishwasher only for its intended

function.

• During installation, the power supply must not

be excessively or dangerously bent or flattened.

Do not tamper with controls.

• The appliance is to be connected to the water

mains using new hose sets and that old hose-sets

should not be reused.

• The maximum number of place settings to be

washed is 10.

• The maximum permissible inlet water pressure

is 1Mpa.

• The minimum permissible inlet water pressure is

0.04Mpa.

READ AND FOLLOW THIS SAFETY

INFORMATION CAREFULLY

KEEP THESE INSTRUCTIONS

WARNING:

IMPORTANT SAFETY INSTRUCTIONS

Summary of content (29 pages)

PAGE 1
IMPORTANT SAFETY INSTRUCTIONS READ ALL THE INSTRUCTIONS BEFORE USING • Do not wash plastic items unless they are marked dishwasher safe or the equivalent. For plastic items not so marked, check the manufacturer's recommendations. • Use only detergent and rinse additives designed for an automatic dishwasher. • Never use soap, laundry detergent, or hand washing detergent in your dishwasher. Keep these products out of the reach of children.
PAGE 2
SAFEGUARDING THE ENVIRONMENT • This appliance has been made of recyclable or re-usable material. Scrapping must be carried out in compliance with local waste disposal regulations. Before scrapping it, make sure to cut off the mains cord so that the appliance cannot be re-used. • For more detailed information on handling and recycling of this product, contact your local authorities who deal with the separate collection of rubbish or the shop where you bought the appliance.
PAGE 3
OPERATION INSTRUCTION IMPORTANT. To get the best performance from your dishwasher, read all operating instructions before using it for the first time. Control panel 1 2 3 4 1 3 in 1 indicator light / 3in1function button: To select and show 3 in 1. 2 Display window: Program remaining time, delay time, running indicator, temperature of water, Error codes, etc. 3 Delayed Start Button: To preset the wash timer and delay the starting time up to 24 hours.
PAGE 4
PRIOR USING FOR THE FIRST TIME Before using your dishwasher for the first time: A. Set the water softener B. Add 1.5Kg dishwasher salt and then full fill the salt container with water C. Fill the rinse aid dispenser D. Fill in detergent A. Water Softener The water softener must be set manually, using the water hardness dial. The water softener is designed to remove minerals and salts from the water, which would have a detrimental or adverse effect on the operation of the appliance.
PAGE 5
B. Loading the Salt Into the Softener Always use the salt intended for use with dishwasher. The salt container is located beneath the lower basket and should be filled as explained in the following: Attention • Only use salt specifically designed for the use in dishwashers! Every other type of salt not specifically designed for the use in a dishwasher, especially table salt, will damage the water softener.
PAGE 6
C. Fill the Rinse Aid Dispenser Rinse Aid Dispenser The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes, which can leave spots and streaks. It also improves drying by allowing water to roll off the dishes. Your dishwasher is designed to use liquid rinse aids. The rinse aid dispenser is located inside the door next to the detergent dispenser.
PAGE 7
1. To open the dispenser, turn the cap to the "open" (left) arrow and lift it out. 1 2. Pour the rinse aid into the dispenser, being careful not to overfill. 2 3. Replace the cap by inserting it aligned with "open" arrow and turning it to the closed (right) arrow. NOTE Clean up any rinse aid spilled while during filling with an absorbent cloth to avoid excessive foaming during the next wash. Don't forget to replace the cap before you close dishwasher door.
PAGE 8
D. Function of Detergent Detergents with its chemical ingredients are necessary to remove dirt, crush dirt and transport it out of the dishwasher. Most of the commercial quality detergents are suitable for this purpose. Detergents There are 3 sorts of detergents 1. With phosphate and with chlorine 2. With phosphate and without chlorine 3. Without phosphate and without chlorine Normally new pulverised detergent is without phosphate. Thus the water softener function of phosphate is not given.
PAGE 9
NOTE: • If the lid is closed: press release button. The lid will spring open. • Always add the detergent just before starting each wash cycle. • Only use branded detergent aid for dishwasher. WARNING: Dishwasher detergent is corrosive! Take care to keep it out of reach of children. Proper Use of Detergent Use only detergent specifically made for the use in dishwashers. Keep your detergent fresh and dry. Don't put powdered detergent into the dispenser until you're ready to wash dishes.
PAGE 10
How To Use The 3IN1 Function Your dishwasher has a 3in1 function which needs no salt and rinse aid but a 3In1 tablet. This dishwasher comes with a 3in1 tablet container as an accessory. NOTE Only the 3in1 function (for the program: intensive/Normal/Eco.) Can be used with 3in1 tablets. If you use 3in1 tablets in other programs, the appliance will not achieve a good performance. 1. The figure below shows how to hang the 3in1 tablet container on the upper basket. 2.
PAGE 11
LOADING THE DISHWASHER BASKET For best performance of the dishwasher, follow these loading guidelines. Features and appearance of baskets and cutlery baskets may vary from your model. Attention before or after Loading the Dishwasher Baskets Scrape off any large amounts of leftover food. Soften remnants of burnt food in pans. It is not necessary to rinse the dishes under running water. Place objects in the dishwasher in following way: 1. Items such as cups, glasses, pots/pans, etc. are faced downwards. 2.
PAGE 12
Loading the Lower Basket We recommend that you place large items which are most difficult to clean into the lower basket: pots, pans, lids, serving dishes and bowls, as shown in the figure to the right. It is preferable to place serving dishes and lids on the side of the racks in order to avoid blocking the rotation of the top spray arm. Pots, serving bowls, etc. must always be placed top down. Deep pots should be slanted to allow water to flow out.
PAGE 13
Cutlery Basket Cutlery should be placed in the cutlery basket with the handles at the bottom. If the rack has side baskets, the spoons should be loaded separately into the appropriate slots, especially long utensils should be placed in the horizontal position at the front of the upper basket as shown in the picture. 1 Tea spoons 2 Dessert spoons 3 Soup spoons 4 Forks 5 Knives 6 Serving forks 7 Serving spoons 8 Gervy ladles IN WARNING: • Do not leave any item extend through bottom.
PAGE 14
STARTING A WASHING PROGRAMME Wash Cycle Table NOTE • Meaning: need to fill rinse into the Rinse-Aid Dispenser. • * En50242: This program is the test cycle, the rinse-aid dispenser setting is recommended to be set to position 6. • The power consumption of off-mode is 0W, left-on model is 0.73W. Program Intensive Normal Cycle selection information Energy (Kwh) Water Rinse (l) Pre-wash (50°C) Wash (65°C) Rinse Rinse Rinse (55°C) Drying 3/22 g 120 1.13 16.
PAGE 15
Turning On the Appliance Starting a cycle wash 1. Draw out the lower and upper basket, load the dishes and push them back. It is commended to load the lower basket first, then the upper one (see the section entitled Loading the Dishwasher). 2. Pour in the detergent (see the section entitled Salt, Detergent and Rinse Aid). 3. Insert the plug into the socket. The power supply is 220-240 VAC /50 HZ, the specification of the socket is 10A 250VAC. Make sure that the water supply is turned on to full pressure. 4.
PAGE 16
MAINTENANCE AND CLEANING Filtering System The filter prevents larger remnants of food or other objects from getting inside the pum. The residues may block the filter, in this case they must be removed. The filter system consists of a coarse filter, a flat (Main filter) And a microfilter (Fine filter). Main filter 1 Food and soil particles trapped in this filter are pulverized by a special jet on the lower spray arm and washed down to drain.
PAGE 17
Remarks: • Inspect the filters for blocking after every time the dishwasher has been used. • By unscrewing the coarse filter, you can remove the filter system. Remove any food remnants and clean the filters under running water. NOTE: The entire filter assembly should be cleaned once a week. Cleaning the Filter To clean the coarse filter and the fine filter, use a cleaning brush.
PAGE 18
Cleaning the Spray Arms It is necessary to clean the spray arms regularly in order to remove the accumulation of scale from the hard water and thus prevent blocking of spray arm jets and bearings. We Suggest to poke the blocked spray arm jets with a needle to ensure good washing effect. Unscrew How to keep your dishwasher in shape • After Every Wash After every wash, turn off the water supply to the appliance and leave the door slightly open so that moisture and odours are not trapped inside.
PAGE 19
INSTALLATION INSTRUCTIONS ATTENTION The installation of the pipes and electrical equipments should be done by professionals. WARNING: Electrical Shock Hazard Disconnect electrical power before installing dishwasher. Failure to do so can result in death or electrical shock. Installation preparation The installation position of dishwasher should be near the existing inlet and drain hoses and power cord.
PAGE 20
Figure 2 Minimum space when the door is opened. Dishwasher Cabinet Door of dishwasher Minimum space of 50 mm Aesthetic panel's dimensions and installation 1. The aesthetic wooden panel could be processed according to the figure 3. Make a furniture door according to the diagram and not to exceed 4 kg. The length of the panel should be within the range of 537--587mm, not more than 587mm. Unit: mm Figure 3 The aesthetic panel should be processed in accordance with the illustrated dimensions.
PAGE 21
2. Install the hook on the aesthetic wooden panel and put the hook into the slot of the outer door of dishwasher (see figure 4a). After positioning of the panel, fix the panel onto the outer door by screws and bolts (see figure 4b). Figure 4a Installation of aesthetic panel. Figure 4b Installation of aesthetic wooden panel ST4.5 screw 1. take away the cover 2. pin up the screw surely Cover 3.
PAGE 22
Tension adjustment of the door spring The door springs are set at the factory to the proper tension for the outer door. If aesthetic wooden panel are installed, you will have to adjust the door spring tension. Rotate the adjusting screw to drive the adjustor to strain or relax the steel cable (see figure 5). Door spring tension is correct when the door remains horizontal in the fully opened position yet rises to a close with the slight lift of a finger. Figure 5 Tension adjustment of the door spring.
PAGE 23
Dishwasher installation steps 1. Install the furniture door to the outer door of the dishwasher using the brackets provided. Refer to the template for positioning of the brackets. 2. Adjust the tension of the door springs by using an Allen key turning in a clockwise motion to tighten the left and right door springs. Failure to do this could cause damage to your dishwasher (illustration 2). 3. Connect the inlet hose to the cold water supply. 4. Connect the drain hose. Refer to diagram (Fig. 6). 5.
PAGE 24
Dishwasher must be level for proper dish rack operation and wash performance. 1. Place level on door and rack track inside the tub as shown to check that the dishwasher is level. 2. Level the dishwasher by adjusting the four leveling legs individually. 3. When level the dishwasher, please pay attention not to let the dishwasher tip over. Check level fron to back Check level side to side Figure 8 Illustration of feet adjustment. NOTE: The maximum adjustment height of the feet is 60 mm.
PAGE 25
WARNING: Improper connection of the equipmentgrounding conductor can result in the risk of an electric shock. Check with a qualified electrician or service representative if you are in doubt whether the appliance is properly grounded. Do not modify the plug provided with the appliance; If it is not fit for the outlet. Have a proper outlet installed by a qualified electrician. WARNING: In order to avoid that there is more water staying in the inlet hose, please close the hydrant after using.
PAGE 26
TROUBLESHOOTING GUIDE Before Calling for Service Review the charts on the following pages may save you from calling for service. Technical problems Problem Possible causes What to do Dishwasher doesn't start Fuse blown, or the circuit breaker acted Replace fuse or reset circuit breaker. Remove any other appliances sharing the same circuit with the dishwasher Power supply is not turned on Make sure the dishwasher is turned on and the door is closed securely.
PAGE 27
Noise Problem Possible causes What to do Knocking noise in the washing cabinet A spray arm is knocking against an item in a basket Interrupt the programme, and rearrange the items which are obstructing the spray arm. Rattling noise in the washing cabinet Items of crockery are loose in the wash cabinet Interrupt the programme, and rearrange the items of crockery. Knocking noise in the water pipes This may be caused by on- This has no influence on the dishwasher function.
PAGE 28
Unsatisfactory drying result Problem Possible causes The dishes are not Improper loading drying What to do Load the dishwasher as suggested in the directions. Too little rinse-aid Increase the amount of rinse-aid/refill the rinse-aid dispenser. Dishes are removed too soon Do not empty your dishwasher immediately after washing. Open the door slightly so that the steam can escape. Begin unloading the dishwasher only once the dishes are barely warm to the touch. Empty the low basket first.
PAGE 29
TECHNICAL INFORMATION Height 820 mm (adjustable + 60mm) Width 445 mm Depth 560 mm Voltage connected load See rating label Water pressure 0.04-1.