Instruction for Use

19
Tension adjustment
of the door spring
【】Figure5
Tension adjustment of the door spring
●
Connection of drain hoses
●
The door springs are set at the factory to the proper tension for the outer door. If aesthetic
wooden panel are installed, you will have to adjust the door spring tension. Rotate the adjusting
screwtodrivetheadjustortostrainorrelaxthesteelcable(seefigure5).
Door spring tension is correct when
the do or rem ain s hori zont al in t he
fully opened position yet rises
to a close with the slight lift of a
finger.
，
relax
Insert the drain hose into a drain pipe with a minimum diameter of 4cm, or let it
runintothesink,makingsuretoavoidbendingorcrimpingit.Usethespe ial
pla stic su ppor t that c ome s wi th th e appl ianc e (fi gure 6 ). Th e f ree an d of t he hos e
must be at a height between 400 and 1000mm and must not be immersed in water
to avoid the back flow of it. ATTENTION: The special plastic hose support must be
solidly fastened to the wall to prevent the drain hose from moving and allowing water
to spill outside the drain.
c
Drain pipe connection
【】Figure6