Instruction for Use
RO -5-
3
1
2
CLICK!
6
4
3
1
2
4
5
6
5
7
8
6
7
8
Prezentarea programelor
Numărul maxim posibil de programe este ilustrat în capitolul „Tabel”. Programele corespunzătoare aparatului dvs. se găsesc pe panou (pagina 1).
Alegeţi programul în conformitate cu tabelul de programe (pagina 1).
Durata programului depinde de condiţiile externe din apartament, de temperatură şi presiune etc.
Din motive care ţin de igienă, se recomandă să se folosească cel puţin o dată pe lună un ciclu cu temperatură ridicată (de ex. Intensiv 65). Astfel aparatul va rămâne curat, complet funcţional şi va fi evitată apariţia mirosurilor neplăcute.
10
9
Filtrele
Verificaţi şi
curăţaţi
dacă este
nevoie
Deşurubaţi
microfiltrul (1),
scoateţi-l (2) şi
apoi scoateţi sita
fină (3)...
Clătiţi sub apă
de la robinet...
Înşurubaţi microfiltrul.
ATENŢIE LA SEMN!
Deşurubaţi şi
scoateţi braţul
inferior...
Braţele de
pulverizare
Înlăturaţi
blocajele/
depunerile.
Introduceţi
Curăţaţi duzele
de pulverizare
sub apă de la
robinet (folosiţi
scobitori dacă
este nevoie)...
Introduceţi şi înşurubaţi bine braţele superior şi inferior.
Deşurubaţi şi
scoateţi braţul
superior...
După terminarea programului, aparatul revine automat în modul
Standby
. Toate ledurile indicatoare se sting.
Aveţi grijă când deschideţi uşa: ies aburi fierbinţi.
Descărcaţi aparatul începând cu coşul inferior pentru a evita scurgerea eventualelor picături de apă pe vasele de jos.
Uşa maşinii de spălat vase trebuie să fie închisă, iar robinetul de apă trebuie să fie deschis.
Pentru a întrerupe programul (de ex. dacă doriţi să introduceţi un
obiect):
-Deschideţi uşa cu grijă (programul se întrerupe) şi introduceţi obiectul/
obiectele
(atenţie, ies aburi FIERBINŢI!)
.
-Apăsaţi pe butonul şi închideţi uşa în decursul a 3 secunde
(programul reia ciclul din punctul în care a fost întrerupt).
Pentru a anula programul în curs
de desfăşurare:
- Deschideţi uşa, apăsaţi pe butonul şi
închideţi uşa.
- (Se evacuează apa timp de 1 minut, apoi
aparatul se opreşte).
Pentru a schimba programul în curs de desfăşurare:
- Deschideţi uşa, apăsaţi pe butonul pentru a anula programul în curs de
desfăşurare şi închideţi uşa.
- (Se evacuează apa timp de 1 minut, apoi aparatul se opreşte).
- Deschideţi uşa şi apăsaţi pe orice buton, cu excepţia butonului , pentru a
porni aparatul.
- Selectaţi un alt program.
-Apăsaţi pe butonul şi închideţi uşa în decursul a 3 secunde.
Selectarea programului
Ciclul de spălare
Oprirea aparatului. Totul este OK...
Întreţinerea şi îngrijirea
Întreţinerea şi îngrijirea
Remediaţi singuri defecţiunile minore...