ADG 522 EN English Operating instructions DISHWASHER - Contents Operating instructions,1 Important Safety Instructions, 2-3 Product Data, 4 Assistance, 4 Installation, 5-6 Electrical Connection, 7 Description of the appliance, 8 Refined salt and rinse aid, 9 Loading the racks, 10-11 Detergent and dishwasher use, 12 Wash cycles, 13 Special wash cycles and options, 14 Care and maintenance, 15 Troubleshooting, 16
EN LEGEND OF SYMBOLS Warning/ Grounding/ Electrical Hazard/ Waste/ Safeguarding the environment/ IMPORTANT SAFETY INSTRUCTIONS Read the instructions carefully before using, as they include important information on safe installation, use and maintenance. Keep this instruction manual in a safe place for future reference. If the appliance is sold, given away or moved, make sure the manual is kept with the machine.
• Improper connection of the equipmentgrounding conductor can result in the risk of an electric shock. • Check with a qualified electrician or service representative if you are in doubt whether the appliance is properly grounded. Do not modify the plug provided with the appliance; If it does not fit the outlet. Have a proper outlet installed by a qualified electrician. PROPER USE • Access to disconnection of the appliance (main plug) shall be ensured after installation.
EN Product Data (product fiche) Product Fiche Brand Model Rated capacity in standard place settings (1) Energy efficiency class on a scale from A+++ (low consumption) to D (high consumption) Energy consumption per year in kWh (2) Energy consumption of the standard cleaning cycle in kWh Power consumption of the off-mode in W Power consumption of the left-on mode in W Water consumption per year in litres (3) Drying efficacy class on a scale from G (low efficacy) to A (high efficacy) Programme time for standa
Installation If the appliance must be moved at any time, keep it in an upright position; if absolutely necessary, it may be tilted onto its back. Connecting the water supply Adaptation of the water supply for installation should only be performed by a qualified technician. The water inlet and outlet hoses may be positioned towards the right or the left in order to achieve the best possible installation. Make sure the dishwasher does not bend or squash the hoses.
EN Advice regarding the first wash cycle After the installation, remove the stoppers from the racks and the retaining elastic elements from the upper rack (if any). Water softener settings Before starting the first wash cycle, set the hardness level of the water from the mains supply. (see chapter Rinse aid and refined salt). First load the softener tank with water, then introduce about 1 kg of salt. It is perfectly normal for water to flow out. As soon as this procedure is complete, run a wash cycle.
Electrical Connection Electrical Connection If your appliance is supplied with a 13 amp. fused plug it can be plugged into a 13 amp socket for immediate use. Before using the appliance please read the instruction below. WARNING: THIS APPLIANCE MUST BE EARTHED. THE FOLLOWING OPERATIONS SHOULD BE CARRIED OUT BY A QUALIFIED ELECTRICIAN. Replacing the fuse: When replacing a faulty fuse, a 13 amp ASTA approved fuse to BS 1362 should always be used, and the fuse cover refitted.
Description of the appliance EN Overall view Upper rack Upper spray arm Tip-up compartments Rack height adjuster Lower rack Lower spray arm Cutlery basket Washing filter Salt dispenser Detergent and rinse aid dispensers Data plate Control Panel 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12.
Refined Salt and Rinse Aid Only use products which have been specifically designed for dishwashers. Do not use table salt or industrial salt. (Follow the instructions given on the packaging.) If you are using a multi-function product, we recommend that you add salt in any case, especially if the water is hard or very hard. (Follow the instructions given on the packaging.) If you do not add salt or rinse aid, the LOW SALT and LOW RINSE AID indicator lights will remain lit.
Loading the racks EN Tips Before loading the racks, remove all food residues from the crockery and empty liquids from glasses and containers. No preventive rinsing is needed under running water. Arrange the crockery so that it is held in place firmly and does not tip over; and arrange the containers with the openings facing downwards and the concave/convex parts placed obliquely, thus allowing the water to reach every surface and flow freely.
Sliding third rack The upper rack is fitted with a sliding third rack which can be used to hold small crockery and cutlery. For optimum washing performance, avoid positioning bulky crockery directly below the rack. The sliding third rack can be removed. (see Figure.) Unsuitable crockery • Wooden crockery and cutlery. • Delicate decorated glasses, artistic handicraft and antique crockery. Their decorations are not resistant. • Parts in synthetic material which do not withstand high temperatures.
Detergent and dishwasher use EN Measuring out the detergent Good washing results also depend on the correct amount of detergent being used. Exceeding the stated amount does not result in a more effective wash and increases environmental pollution. The amount can be adjusted to the soil level. In the case of normally soiled items, use approximately either 25g (powder detergent) or 25ml (liquid detergent). If tablets are used, one tablet will be enough.
Wash cycles Wash-cycle data is measured under laboratory conditions according to European Standard EN 50242. Based on the different conditions of use, the wash-cycle duration and data can change. Wash cycle which include drying 1. Eco EN Options Approximate duration of wash cycles h:min. Water consumption (l/cycle) Energy consumption (kWh/cycle) Yes Start Delay - Multizone - Tab - Turbo - Extra Dry 03:00 9 0,74 2.
Special wash cycles and Options EN Notes: Optimum performance levels when using the “1 Hour” and “Rapid” cycles can be achieved by respecting the specified number of place settings. To reduce consumption even further, only run the dishwasher when it is full. Note for Test Laboratories: for information on comparative EN testing conditions, please send an email to the following address: contact@whirlpool.
Care and maintenance Shutting off the water and electricity supplies • Turn off the water tap after every wash cycle to avoid leaks. • Always unplug the appliance when cleaning it and when performing maintenance work. Cleaning the dishwasher • The external surfaces of the machine and the control panel can be cleaned using a non-abrasive cloth which has been dampened with water. Do not use solvents or abrasive products.
Troubleshooting EN 195146149.00 - NC 05/2016 jk - Xerox Fabriano Whenever the appliance fails to work, check for a solution from the following list before calling for Assistance. Problem: Possible causes / Solutions: The dishwasher does not start • The water supply tap is not turned on. or cannot be controlled. • Switch off the appliance by pressing the ON/OFF button, switch it back on after approximately one minute and reset the wash cycle.