Instruction for Use

ENGLISH

5.2. Description of the Controls

Below is a brief description of the functions carried

out by the keys on the control panel.

Temperature Blast chilling Key

By pressing the key with the machine at a

standstill, it allows to select a temperature blast

chilling cycle (+90°Cà+3°C).

Time Blast chilling Key

By pressing the key with the machine at a

standstill, it allows to select a time blast chilling

cycle.

Time Blast chilling Key

By pressing the key with the machine at a

standstill allows to select a temperature shock

freezing cycle (+90°Cà-18°C).

Time Shock freezing Key

By pressing the key with the machine at a

standstill, it allows to select a time shock freezing

cycle.

Time increase and decrease keys

When the time blast chilling and/or shock freezing

mode is selected, these buttons allow to set the

cycle duration.

Cycle start key

Once a cycle has been selected, press this button

to start the cycle.

If it is pressed during functioning the appliance

stops; the setting of the previous cycle selected

remains, which can be started immediately.

By pressing this button for at least 5 seconds the

machine passes to the stand-by mode. Repeat

the procedure to reactivate the board.

DEFROST key

When the machine is off a manual defrosting

cycle can be started.

Display (DY1): symbols description

Ø S1 : shock-freezing cycle on

Ø S2 : blast-chilling cycle on

Ø S3 : preserving cycle on

Ø S4 : temperature cycle on (referred to S1 or

S2)

Ø S5 : time cycle on (referred to S1 or S2)

Ø S6 : power supply on – always on even with

machine in stand-by