Instruction for Use

3
ENGLISH
GB
3. REGULATIONS AND GENERAL INSTRUCTIONS
3.1. General information
This manual has been designed by the
manufacturer to provide the necessary information
to those who are authorised to interact with the
appliance.
The persons receiving the information must read it
carefully and apply it strictly.
Reading the information contained in this
document will allow the user to prevent risks to
personal health and safety.
Keep this manual for the entire operating life of
the equipment in a place which is well-known and
easily accessible, so that it is always available
when its consultation becomes necessary.
Particular symbols have been used to highlight
some parts of the text that are very important or to
indicate some important specifications. Their
meanings are given below: Caution - Warning
! Indicates important information regarding
safety. Behave appropriately so as not to risk
the health and safety of persons or cause
damage.
Important
iIndicates particularly important technical
information that must not be ignored.
3.2. Warranty
The warranty of the equipment and the
components we produce has duration of 1 (one)
year from the date of delivery and translates into
the supply, free of charge, of parts that we
consider to be faulty.
These faults must, however, be independent from
incorrect use of the product in compliance with the
indications stated in the manual.
Fees deriving from labour, journeys and transport
are excluded from the warranty.
The materials replaced under warranty are our
property and must therefore be returned under the
responsibility and expense of the customer.
3.3. Replacement of Parts
! Activate all envisioned safety devices before
carrying out any replacement intervention.
iIn particular, deactivate the electrical power
supply using the differential isolating switch.
Only use original spare parts to replace worn
components.
iAll responsibility is declined for injury to
persons or damage to components deriving from
the use of non-original spare parts and
interventions which could modify the safety
requisites, without authorisation of the
manufacturer.