0811_GB_42 Instructions for installation, use e maintenance ELECTRIC CHIPS SCUTTLE ADN 658 04/2008
CHARACTERISTICS Supplied by: Date: Customer Service: FAX e-mail 0811_GB_42 - ELECTRIC CHIPS SCUTTLE 04/2008 2 · 12
INDEX 1 Diagram 4 2 Features of the appliances 5 3 Technical data 5 4 Installation instructions 4.1 Safety rules 4.2 Structure, framework and safety devices of the appliances 4.3 Assembly 4.3.1 Installation premises 4.3.2 Statutory regulations and technical requirements 4.3.3 Installation 4.3.4 Electrical connection 4.3.5 Equipotential 6 6 6 6 6 6 6 6 6 5 Operation preparation 5.1 Preparation and Start-up 5.1.1 Start-up 5.1.2 Operator training 5.2 Maintenance 5.3 Replacing parts 7 7 7 7 7 7 6 6.
1 - DIAGRAM ADN 658 600 60 400 103 240.
2 - CHARACTERISTICS OF THE APPLIANCES These appliances are used for professional purposes. Installation, repair and use must be carried out by expert personnel. The data plate is located on the appliance and contains all the data needed for installation. Beware of inexpert handling.
4 - INSTALLATION INSTRUCTIONS 4.1 Safety rules 4.3.2 Statutory regulations and technical requirements • Only a local gas utility technician is authorized to carry out gas installations and connections. The statutory regulations (applied in Germany VDE, Austria ÖVE, Switzerland SEV, etc.) and connection conditions performed by the gas utility must be strictly observed.
5 - SET-UP FOR OPERATION 5.1 Preparation and Start-up 5.3 Replacing parts Before starting up the appliance, remove the protective wrapping. Then carefully clean the working surface and the external parts with lukewarm water and detergent, using a damp rag to remove all traces of anti-rust material applied in the factory, then dry with a clean cloth.
6 - INSTRUCTIONS FOR USE 6.5 Appliance care and frequency of maintenance Fig. 1 0 1 1 6.2 Start-up Before using the appliance for the first time, thoroughly clean the tank with lukewarm water and detergent, using a soft cloth to eliminate all trace of the rust-proofing applied in the workshop. Dry with a clean cloth. Turn on the main switch upstream of the appliance. Turn on switch (pos. 1 fig. 1) of the appliance, come on shows that the appliance is on. To turn the appliance off, turn off switch.
6 - INSTRUCTIONS FOR USE • • • • use bleaching products or products containing chloride. Follow all indications given by the company concerning special soaps and cleaning methods to be used for the appliance. If no specific cleaning recommendations are available, it is necessary, however, to use detergents having a low chloride content. After cleaning, remove all soap residues with plenty of clean water and thoroughly dry the surfaces.
6 - INSTRUCTIONS FOR USE 6.6.3 The 2002/96/EC (WEEE) Directive: information to users Fig. A This informational note is meant only for owners of equipment marked with the symbol shown in fig. A on the adhesive label featuring the technical specifications applied on the actual product (the label also giving the serial number).
7 - APPENDIX: ELECTRICAL DIAGRAMS ADN 658 R1 B1 mA 1 L1 2 N 230V PE mA Terminal board B1 Switch R1 Heating element 350 W Total power: 0.
WARNING THE MANUFACTURER CANNOT BE HELD RESPONSIBLE FOR ANY INACCURACIES IN THIS BOOKLET DUE TO COPYING OR PRINTING ERRORS. DUE TO ITS POLICY OF CONTINUAL PRODUCT IMPROVEMENT, THE MANUFACTURER RESERVES THE RIGHT TO MAKE ANY CHANGES DEEMED NECESSARY. THE MANUFACTURER CANNOT BE HELD RESPONSIBLE IF THE INSTRUCTIONS CONTAINED IN THIS MANUAL ARE NOT OBSERVED. WHIRLPOOL EUROPE srl V.