0810_GB_42 Instructions for installation, use e maintenance ELECTRIC PASTA COOKER ADN 656 ADN 641 04/2008
CHARACTERISTICS Supplied by: Date: Customer Service: FAX e-mail 0810_GB_42 - ELECTRIC PASTA COOKER 04/2008 2 · 12
INDEX 1 Diagram 4 2 Characteristics of the appliances 5 3 Technical data 5 4 Installation instructions 4.1 Safety rules 4.2 Structure, framework and safety devices of the appliances 4.3 Assembly 4.3.1 Installation premises 4.3.2 Statutory regulations and technical requirements 4.3.3 Installation 4.3.4 Electrical connection 4.3.5 Equipotential 6 6 6 6 6 6 6 6 6 5 Operation preparation 5.1 Preparation and Start-up 5.1.1 Start-up 5.1.2 Operator training 5.2 Maintenance 5.
1 - DIAGRAM ADN 641 700 60 400 150 690 678 Electric power 79 45 310 545 55 45 Data plate 79 700 Electric power Data plate 400 ADN 656 400 60 600 103 240.
2 - CHARACTERISTICS OF THE APPLIANCES These appliances are used for professional purposes. Installation, repair and use must be carried out by expert personnel. The data plate is located on the appliance and contains all the data needed for installation. Beware of inexpert handling.
4 - INSTALLATION INSTRUCTIONS 4.1 Safety rules 4.3.2 Statutory regulations and technical requirements • Only a local gas utility technician is authorized to carry out gas installations and connections. The statutory regulations (applied in Germany VDE, Austria ÖVE, Switzerland SEV, etc.) and connection conditions performed by the gas utility must be strictly observed.
5 - SET-UP FOR OPERATION 5.1 Preparation and Start-up 5.3 Replacing parts Before starting up the appliance, remove the protective wrapping. Then carefully clean the working surface and the external parts with lukewarm water and detergent, using a damp rag to remove all traces of anti-rust material applied in the factory, then dry with a clean cloth.
6 - INSTRUCTIONS FOR USE Fig. 1 6.4 Turning the appliance off in case of breakdown 6.4.1 What to do in case of failure In case of breakdown or malfunctioning or failure turn off the appliance. Switch off any electric power. Call the service centre. 6.4.2 What to do in case of prolonged period of disuse When the appliance is not to be used for a long time, clean thoroughly, cas instructed in the chapter 6.5 “Appliance care and frequency of maintenance”, switch off any electric power. 1 2 6.
6 - INSTRUCTIONS FOR USE More damage can be caused by: • outside rust (i.e. from other components, tools or incipient rust) • iron particles (i.e. file dust) • contact with non-ferrous metals (element build up) • lack of oxygen (i.e. no air inlet, water lacking oxygen). 6.6.2 Warnings and advice for maintenance of “stainless steel” appliances • “Stainless” steel equipment surfaces must be kept clean and in contact with air at all times.
6 - INSTRUCTIONS FOR USE 6.6.3 The 2002/96/EC (WEEE) Directive: information to users Fig. A This informational note is meant only for owners of equipment marked with the symbol shown in fig. A on the adhesive label featuring the technical specifications applied on the actual product (the label also giving the serial number).
7 - APPENDIX: ELECTRICAL DIAGRAMS ADN 656 ADN 641 R2 R1 H1 5 2 1 3 4 B1 P3 P1 P2 2 X X 1 X X X X mA 0 B1 5 P3 mA B1 H1 R1 R2 2 1 P1 3 L1 L2 PE 230V 4 P2 Terminal board Commutator Green indicator light Heating element inferior 1500 W Heating element superior 1500 W Total power: 3.
WARNING THE MANUFACTURER CANNOT BE HELD RESPONSIBLE FOR ANY INACCURACIES IN THIS BOOKLET DUE TO COPYING OR PRINTING ERRORS. DUE TO ITS POLICY OF CONTINUAL PRODUCT IMPROVEMENT, THE MANUFACTURER RESERVES THE RIGHT TO MAKE ANY CHANGES DEEMED NECESSARY. THE MANUFACTURER CANNOT BE HELD RESPONSIBLE IF THE INSTRUCTIONS CONTAINED IN THIS MANUAL ARE NOT OBSERVED. WHIRLPOOL EUROPE srl V.
