Quick Start Guide

Further indications are given in the pages to follow and in the user instructions.
Programme selector
Start button
Indicator lamp lit while the dishwasher is operating.
Flashes when a fault occurs.
Switches off at the end of the programme.
Options
Half Load Button - Upper rack
Half Load Button - Lower rack
Load the upper
or
lower rack
only
. This function can be used
with any programme.
The corresponding indicator lamp lights up.
Press the button again to deactivate the half-load function.
Options
Delayed start button
The wash cycle can be
programmed to start after
1 - 9 hours
With each successive
touch of the button, the
delayed start indicator
increases by 1 hour, and
after 9 returns to 0.
Then press the Start
button.
The dishwasher will start at
the set time.
Rinse aid level indicator
Add rinse aid.
Salt level indicator
Add regeneration salt; only add regeneration salt
immediately before starting a wash programme.
Programme progress indicator
Pre-rinse / Pre-wash
Washing
Drying
Programme end
Programme Symbol
and Temperature
Programme selection and
recommended load type
Place the detergent in the:
small compartment large compartment
Consumption
1)
Normal Load /
(Half Load / Multizone)
Water
(Litres)
Energy
(kWh)
Time
(Min.)
Normal 40 - 55° C
Recommended programme
for routine washes
, for
crockery with little or no dried-on food.
X X
(13,5)
(11,5)
(1,3)
(0,9)
(80)
(60)
Intensive 60 - 70° C
Recommended programme
for heavily soiled crockery
,
with dried-on food. Especially suitable for pans and
saucepans.
X X
(19,5)
(11,5)
(1,7)
(1,3)
(98)
(90)
Pre-wash
Crockery to be washed later.
- - 5.0 (4.2) 0.02 (0.02) 9(9)
Rapid 40° C
Lightly soiled crockery with no dried-on food.
- X 13.0 (13.0) 0.85 (0.75) 30 (30)
Glasses 40° C
Light soiling, especially glasses and cups.
- X 12.5 (10.5) 0.82 (0.78) 60 (59)
Bio
2)
Normally or heavily soiled crockery with dried-on food.
X X 16.0 (14.5) 1.05 (0.90) 120 (117)
6th SENSE: Optimum wash results coupled with maximum
energy savings
The two sensor-controlled programmes are recommended for routine
washes.
They use double sensor technology designed to ensure optimum
wash results with minimum water and energy consumption.
Quick Reference Guide
GB
5019 100 91256
(We reserve the right to make technical modifications)
1) Values may vary in relation to usage, e.g.: different loads, water temperatures - above or below 15° C -
as well as water hardness and power supply voltage.
2) Reference programme for Test Institute and energy-label.
ADP 2968