3de94300.fm Page 2 Thursday, April 4, 2002 4:02 PM DEUTSCH ENGLISH FRANÇAIS NEDERLANDS ITALIANO Black process 45.0° 100.
3de94300.fm Page 3 Thursday, April 4, 2002 4:02 PM GEBRAUCHSANWEISUNG VOR DEM GEBRAUCH/ANSCHLIESSEN HINWEISE UND RATSCHLÄGE REGENERIERSALZ EINFÜLLEN KLARSPÜLER EINFÜLLEN REINIGER EINFÜLLEN WARTUNG UND PFLEGE 3 Black process 45.0° 100.
de94300.fm Page 4 Thursday, April 4, 2002 4:02 PM VOR DEM GEBRAUCH/ANSCHLIESSEN 1. Auspacken und kontrollieren: Nach dem Auspacken sicherstellen, dass das Gerät keine Transportschäden aufweist und die Tür richtig schließt. Im Zweifelsfalle wenden Sie sich bitte an einen qualifizierten Techniker oder Ihren Händler. • Das Verpackungsmaterial (Plastikbeutel usw.) außerhalb der Reichweite von Kindern aufbewahren, da es eine mögliche Gefahrenquelle darstellt. 2.
3de94300.fm Page 5 Thursday, April 4, 2002 4:02 PM HINWEISE UND RATSCHLÄGE 1. Verpackung: Die Verpackung besteht aus 100% recyclingfähigem Material und ist durch das Recycling-Symbol gekennzeichnet. 2. Energie und Wasser sparen: • Geschirr nicht unter fließendem Wasser vorspülen. • Geschirrspüler stets voll beladen oder bei Beladung nur eines Korbes Programm für halbe Beladung/ Multizone (falls verfügbar) wählen. • Wenn umweltschonende Energiequellen, wie z.B.
3de94300.fm Page 6 Thursday, April 4, 2002 4:02 PM REGENERIERSALZ EINFÜLLEN Ab einer Wasserhärte von Stufe 2-4 muss der Wasserenthärter vor der ersten Benutzung mit ca. 2 kg Regeneriersalz und 1 l Wasser gefüllt werden (Wasserhärte beim Wasserwerk erfragen oder auf der letzten Wasserrechnung nachsehen). Falls der Härtebereichschalter nicht auf 3 gestellt ist (Stellung bei Auslieferung) bzw.
3de94300.fm Page 7 Thursday, April 4, 2002 4:02 PM KLARSPÜLER EINFÜLLEN Klarspüler entspannt das Wasser, damit es gleichmäßig vom Geschirr abläuft und keine Schlieren oder Flecken auf dem Geschirr hinterlässt. Behälter vor der ersten Benutzung mit Klarspüler füllen. Verwenden Sie nur Klarspüler für Haushalts-Geschirrspülmaschinen. 1. Deckel öffnen, nach links drehen. 2. Den Behälter für Karspüler bis zum Rand füllen.
3de94300.fm Page 8 Thursday, April 4, 2002 4:02 PM REINIGER EINFÜLLEN Reiniger kann in eine dafür vorgesehene Mulde und in eine Kammer eingefüllt werden. Verwenden Sie jedoch aus Gründen des Umweltschutzes nie mehr Reiniger, als vorgegeben. Diese Menge ist individuell verschieden. Bei Verwendung von Reiniger in Tablettenform, unbedingt die Empfehlung des Herstellers beachten. Reiniger der “neuen Generation” enthalten Enzyme, die am wirksamsten reinigen, wenn Sie vorzugsweise die Bio-Programme verwenden.
3de94300.fm Page 9 Thursday, April 4, 2002 4:02 PM Oberer Sprüharm: 1. 2. 3. 4. Oberkorb herausheben. Mutter lösen (nach links drehen) und Sprüharm nach unten abziehen. Düsen abspülen. Sprüharm wieder mittig aufsetzen und Mutter anziehen (nach rechts drehen), dabei nicht verkanten. Die Mutter muss festsitzen, klick! Sprüharm muss frei drehbar sein. Unterer Sprüharm: 1. 2. 3. 4. Unterkorb herausheben. Feststeller lösen und Sprüharm nach oben abziehen. Düsen abspülen.