Setup guide

LC3000 LAUNDRY READER CONFIGURATION
PRINTED OCTOBER 6, 2009
1-10
OFFLINE: An asterisk (*) in the first line, second to the last position indicates the terminal is
offline.
Configure LC3000 Reader using front panel
1 Swipe a Service Card, and then press NEXT to start the configuration
process.
2 Adjust each setup parameter using the keys displayed on the
Ter mi na l.
ACCEPT - Accept displayed value and advance to next setting.
CHANGE - Change displayed value.
ABORT - Abort configuration process.
To update the IP address and related information, press CHANGE
when the parameter is displayed; then type the number using zeroes
(0) as placeholders.
LC3000Config
MAC Address
IP Address
DHCP Status
Communication
Mo de
DHCP
Reader Address Baud Rate
RS-485 Communications
IP Communications
IP Address
Subnet Mask
Default Router/
Gateway
Host IP Address
Disabled
Enabled
Host DHCP Telnet Enable
Service Card
Enable
Save
Disable
Figure 1-6 LC3000 Laundry Reader
Figure 1-7 Front panel
configuration