Setup guide

LC3000 LAUNDRY READER INSTALLATION GUIDE
D OCUMENT 1135 REV 03
PRINTED OCTOBER 6, 2009 1-41
MW9010/MW9012 LAUNDRY READER RETROFIT
BbTS Unix laundry centers with existing MW9010/MW9012 Laundry Readers can upgrade to the LC3000
Laundry Reader. Upgrading the Reader does not require wiring, LCM2s or laundry machine interface
replacements.
The LC3000, as shipped from Blackboard, is configured for up to 60 machines on up to 3 LCM20s. Once
the LC3000 is mounted and connected to the existing system, configure the LC3000 to communicate with
existing LCM2s and existing interfaces.
The LC3000 communicates with 60 laundry machines.
Configure LC3000 for retrofit (wired laundry centers only)
1 Connect to the LC3000 using a RS-232 connection or Telnet.
2 Login using the default password: IPrdr4U.
3 At the prompt, type:
machine alllcm2
This configures the Reader to communicate with all connected laundry machines using the LCM2
interface.
4 Type machines to list the machine interfaces for all 60 machines.
Machine interface configurations are not affected by resetting Reader to the default
configuration or other configuration commands.