Setup guide

L AUNDRY CENTER COMPONENTS
PRINTED OCTOBER 6, 2009
1-4
LAUNDRY CENTER COMPONENTS
LC3000 Components
COMMON COMPONENT
Laundry Reader LC3000 Each LC3000 supports up to 60 machines (stacked units count as 2 machines).
Wired installations require LCM20(s) and LCIs.
Wireless installations require LE3/BRIDGE(s) and LWI(s).
WIRED COMPONENTS
Laundry
Controller
Multiplexer
LCM20 Each LCM20 supports 20 wired machines. The first LCM20 is installed inside the
LC3000. The second and third LCM20s each require a Power Supply Enclosure
(LE3/PSENCL).
Power Supply /
Enclosure
LE3/PSENCL
An LE3/PSENCL power supply/enclosure is required for the 2
nd
and 3
rd
LCM20s. A
2
nd
LCM20 is required if the LC3000 is controlling more than 20 machines, a 3
rd
LCM20 is required if the LC3000 is controlling more than 40 machines.
Interfaces
Maytag LCI3010 All Maytag commercial debit-card ready machines are supported by the LCI3010. An
LCI3010 is required for each single machine or for a complete stacked unit (both top
and bottom unit supported by a single LCI3010).
Speed Queen LCI3020 Only Speed Queen NetMaster and MDC models are supported by the LCI3020. An
LCI3020 is required for each single machine. Two LCI3020s are required to support a
stacked unit.
Whirlpool LCI3030 Only Whirlpool Advantech models are supported by the LCI3030. A LCI3030 is
required for each single machine. Two LCI3030s are required to support a stacked
unit.
WIRELESS COMPONENTS
Wireless Bridge LE3/BRIDGE Each LE3/BRIDGE is the hub of a wireless network for up to 60 machines. The LE3/
BRIDGE needs to be no further than 60 feet from each of the machines on its
wireless network. The LE3/BRIDGE connects to the LC3000 via a standard CAT5
patch cable.
Interfaces
Maytag LWI3010 All Maytag commercial debit-card ready machines are supported by the LWI3010. A
LWI3010 is required for each single machine or for a complete stacked unit (both top
and bottom units are supported by a single LWI3010).
Speed Queen LWI3020 Speed Queen NetMaster and MDC models are supported by the LWI3020. A
LWI3020 is required for each single machine or for a complete stacked unit (both top
and bottom units are supported by a single LWI3020).