Instruction for Use

3
WARNING: to avoid a hazard
due to instability, positioning or
fixing of the appliance must be
done in accordance with the
manufacturer instructions.
WARNING: keep the appliance
ventilation openings clear of
obstruction.
WARNING: do not damage the
appliance refrigerant circuit pipes.
WARNING: Do not use
mechanical, electric or chemical
means other than those
recommended by the
Manufacturer to speed up the
defrost process.
WARNING: Do not use or place
electrical devices inside the
appliance compartments if they
are not of the type expressly
authorised by the Manufacturer.
WARNING: ice-makers and/or
water dispensers not directly
connected to the water supply
must be filled with potable water
only.
Information: This appliance does
not contain CFCs. The refrigerant
circuit contains R134a (HFC) or
R600a (HC) (see the rating plate
inside the appliance).
Appliances with Isobutane
(R600a): isobutane is a natural gas
without environmental impact,
but is flammable. Therefore, make
sure the refrigerant circuit pipes
are not damaged. Keep special
attention in case of damaged pipes
emptying the refrigerant circuit.
This product may contain
Fluorinated Greenhouse Gases
covered by the Kyoto Protocol;
the refrigerant gas is inside a
hermetically sealed system.
Refrigerant gas: R134a has a
Global Warming Potential of
(GWP) 1300.
C-Pentane is used as blowing
agent in the insulation foam and it
is a flammable gas. Pay special
attention during disposal
operations.
This appliance is intended to be
used in household and similar
applications such as - staff kitchen
areas in shops, offices and other
working environments;
- farm houses and by clients in
hotels, motels and other
residential type environments;
- bed and breakfast type
environments;
- catering and similar non-retail
applications
Do not store explosive substances
such as aerosol cans with a
flammable propellant in this
appliance.
This appliance can be used by
children aged from 8 years and
above and persons with reduced
physical, sensory or mental
capabilities or lack of experience
and knowledge if they have been
IMPORTANT SAFETY INSTRUCTIONS