Quick Start Guide

5019 600 00475A Printed in Italy 04/10
To activate the Stand-by function, press button A for 3 seconds and the appliance will switch off.
To switch it back on, press button A again.
Stand-by function
Note:
The temperature alarm may activate if the door is left open for a prolonged period of time
or following the introduction of fresh food in the freezer compartment; this temporary rise in
temperature does not affect the storage of already frozen food in any way.
ALARM SIGNAL
1. Press button A (the freezer on/off button) for 3 seconds.
2. Unplug the appliance or switch off at the main switch.
3. Pull out the defrost water drain.
4. Follow the instructions given in the instructions booklet.
5. Plug in the appliance once again.
6. Press button A, the /freezer on/off button.
Follow the steps detailed in “Switching on the appliance”.
DEFROSTING
Signal Cause Solution
Temperature alarm Led B lights up The internal
temperature is
above -12°C
Keep the door closed
until the alarm deacti-
vates.
FIDKNSEGRITPTESNLFRGBDE