Instruction for Use

30
Cleaning of jet heads
The jet head should be dismounted and cleaned regularly according to how often the combi
steaming and ClimaOptima modes are used. The easiest way to clean the jet head is to let it
soak in scale remover. All ovens are supplied with an additional jet head (in a box in the oven
chamber on delivery).
If the oven is equipped with the automatic cleaning system, CombiWash, there will be two jet
heads. The other jet head will be located to the right of or above the first one. This jet head
should also be checked/cleaned regularly.
Please note the position of the jet heads:
Exterior cleaning
Wash the oven cabinet on the outside with soapy water and dry with a soft and damp cloth.
After drying, apply STEEL OIL (follow directions on the packaging). The steel oil is available
from your oven supplier (0.5 litre: part No. 045650 – 5 litres: part No. 045654) and is only for
external use.
Note! The exterior of the oven must never be flushed with a water hose or high-pressure
cleaner as this may damage the electronic components.
Filter
Under the front panel is a filter that should be cleaned on a weekly basis – either manually or
automatically.
Remember to fit the filter again after cleaning to prevent dirt, soil, etc. from entering the oven.
If the filter is not cleaned, the computer may get too hot, causing the oven to fail.
The jet head for steam / ClimaOptima
should be located with the notch
facing downwards (the long tube).
The jet head for CombiWash should
be located with the notch facing
upwards (the short tube).