VALIDITY FROM SERIAL NUMBER 70500783 006_03 07/2007 Installation, operating and maintenance instructions ELECTRIC TILTING COOKER AGB 505/WP AGB 507/WP
INDEX Models and dimensions General reminders and notes page 3 Possible failures and their elimination page 6 4 Use and cleaning 7 General reminders 4 Warnings and hints for user 7 Technical data 4 Instructions for use 7 Construction 5 Switch on, start Laws, technical prescriptions and directives 5 Special requirements for the installation site 5 of cooking and switch off 7 Special precautions 7 Cleaning and care of the appliance 7 Daily cleaning 7 Special procedures Positioning,
Models and dimensions 900 1110 945 210 AGB 505/WP - AGB 507/WP E 120 165 230 A T 35 480 53 695 53 330 370 525 125 700 50 220 800 TAE- Technical data plate Water connection D.
GENERAL REMINDERS AND NOTES - Read the warnings contained in this manual carefully as they provide important information concerning safety during the installation, use and maintenance of the appliance. - Keep these instructions carefully! - Only personnel trained for its specific use should use the equipment. - Keep the appliance under control during use. - The appliance should be used only for the purpose for which it has been specifically designed; other uses are improper and hence dangerous.
CONSTRUCTION - Robust steel structure on 4 adjustable feet. Exterior and top finish entirely made of stainless steel 18/10. - Stainless steel pan with steel bottom in model AGB 505/WP. - Stainless steel pan with bimetal bottom in model AGB 507/WP. - Stainless steel lid, hinge.mounted. - Hand tilting of the pan. - Heating of the pan by means of three heating elements (3400W 240V each), fitted to the bottom of the pan.
Electrical connections and equipotential bonding Warning!: The appliance is supplied to operate according to the power supply indicated on the data plate. - As mentioned, the appliance must be connected to the power supply by way of a multiple pole main isolating switch and protection device, that must be proportioned to the power of the appliance (1 mA per kW of rated power). - The earthing system must be efficient.
USE AND CLEANING WARNINGS AND HINTS FOR USER SPECIAL PRECAUTIONS - This manual contains all the instructions required for a proper and safe use of our appliances. Keep the manual in a safe place for future consultation! - This appliance is for catering use, hence they must be used only by trained kitchen staff. - The appliance must always be kept under control during use.
- Remove the insulation protection (Pos. B), unloosing the fixing screws to the pan. - If the appliance is to stand idle for any length of time (e.g. - Remove the protection panel of heating elements. (Pos. C). holidays or seasonal closing) it must be cleaned thorou- - Remove the heating element support plate (Pos. D) from damaged heating element. ghly, leaving not traces of food or dirt. - Leave the lid open so that air can circulate inside the vat.
THE 2002/96/EC DIRECTIVE (WEEE): information to users This informational note is meant only for owners of equipment marked with the symbol shown in Fig. A on the adhesive label featuring the technical specifications applied on the actual product (the label also giving the serial number).
Wiring diagrams AGB 505/WP AGB 507/WP 4 5 6 R 1 2 3 12 14 16 C2 11 13 15 B2 F2 C1 B1 F1 H2 mA 1 2 3 4 5 H1 6 400 V 3N~ L1 L 2 L 3 N 9.
Replacement of heating element C B D E G A. B. C. D. E. F. G. H. I. Fixed front panel Rear protection Heating element protection panel Suport plate for heating element Heating element Nut M8 Pan Boss for bulb protection Bulb I A H F Control knob B C 50 D 200 A. B. C. D.
WARNING THE MANUFACTURER CANNOT BE HELD RESPONSIBLE FOR ANY INACCURACIES IN THIS BOOKLET DUE TO COPYING OR PRINTING ERRORS. DUE TO ITS POLICY OF CONTINUAL PRODUCT IMPROVEMENT, THE MANUFACTURER RESERVES THE RIGHT TO MAKE ANY CHANGES DEEMED NECESSARY. THE MANUFACTURER CANNOT BE HELD RESPONSIBLE IF THE INSTRUCTIONS CONTAINED IN THIS MANUAL ARE NOT OBSERVED. WHIRLPOOL EUROPE srl V.
