PROFESSIONAL DISHWASHERS MODELS AGB 674-780 AGB 693-694 AGB 675-676 AGB 685-686 AGB 790-791 AGB 681-682 AGB 687-789
1 Usage and safety warnings 2 Installation and positioning 3 Technical characteristics 4 Installer instructions 5 First startup 6 User instructions 7 Maintenance and cleaning (user) 8 Problems and anomalies (user) Thank you for having chosen this product. We recommend that all of the instructions contained in the manual be read carefully in order to fully understand the most suitable conditions for proper use of the dishwasher.
1 USAGE AND SAFETY WARNINGS THIS MANUAL CONSTITUTES AND INTEGRAL PART OF THE DISHWASHER; IT MUST ALWAYS BE PRESERVED INTACT, TOGETHER WITH THE MACHINE. POSITIONING, CONNECTIONS, ACTIVATION AND TROUBLESHOOTING, AND SUBSTITUTION OF THE POWER CABLE MUST BE PERFORMED BY QUALIFIED PERSONNEL. THE DISHWASHER IS INTENDED EXCLUSIVELY FOR PROFESSIONAL USE AND MUST BE USED BY AUTHORIZED PERSONNEL.
2 INSTALLATION AND POSITIONING INSTALLATION AND POSITIONING Bring the dishwasher to its installation location, remove its packaging and verify the integrity of the apparatus and of its components. If damaged, written notification must be sent to the transporter. The packaging elements (plastic bags, polystyrene foam, nails, etc) must not be left within reach of children and domestic animals as they are a potential source of danger. All of the materials used for packaging are compatible with the environment.
3 TECHNICAL CHARACTERISTICS AGB 674780 AGB 675676 AGB 681682 AGB 693694 AGB 685686 AGB 687789 AGB 790791 Power supply V 400V/3 400V/3 400V/3 400V/3 400V/3 400V/3 400V/3 Frequency Hz 50 50 50 50 50 50 50 Max.
4 INSTALLER INSTRUCTIONS The installation must be made by a qualified person, carefully observing all the manufacturer's indications. After having unpacked the dishwasher, inspect it to see if it has been damaged during shipment. If there is any suspect evidence, consult a service representative. All the packing materials (bags - Styrofoam - nails - etc.) must not be left where they can cause harm to persons, especially children.
Caution!!! The dishwasher is free of electrical current only when the main switch is off. ‐ ‐ Connect the apparatus to the usage equalizer. The clamp for the connection is located at the lower back of the machine. The protection conductor (PE) is yellow-green in color, the neutral conductor (N) is blue and the phase conductors (L1, L2, L3) are black 5 FIRST STARTUP ( Installer ) The inlet water valves are open 5.
6 USER INSTRUCTIONS AGB 674-780 AGB 675-676-681-682-693-694-685-686-687-789-790-791 6.1 on/off selector Cycle push button Speed selector Stop push button Wash Tanks thermometres Rinse thermometre Before washing The inlet water valves are open Before starting up the machine, make sure: Rinse aid and detergent containers are full and their respective dosing units are - The overflow tubes are located working properly correctly. The wall switch is turned on - The filters are well located.
6.2 Loading the dishes Plates The rack can hold 12 bowls or 18 plates. Remove solid residues from the plates (bones, peels, cores, etc.); let plates, with dried residues of cheese, egg, etc., soak in cold water before washing. Glasses Position the glasses upside down. Silverware Use the appropriate basket. It is preferable to arrange large amounts of silverware with the handles facing down, taking care to avoid injury from fork prongs and knife blades. 6.
Remove from the dishes all food leftovers and grease then place the items to be washed in the baskets. If the tableware has been waiting a long time to be washed, it will first to be soaked. Introduce basket into the machine. Caution: when the machine is functioning do not open doors quickly When the baskets are not removed, they continue onward until they contact the end-travel micro switch which automatically stops the bar movement and turns off the rinse water.
7 MAINTENANCE AND CLEANING Although special, programmed maintenance is not required, we recommend having the dishwasher checked by a specialized technician twice a year. Note: intentional damage or that derived from carelessness, negligence, lack of respect for the regulations, instructions and norms or erred connections are not to be considered the responsibility of the manufacturer. 7.
Finally, turn off the main switch and close the water supply faucet. The detergent and rinse-aid suction tubes will be placed back in the containers when the machine is ready to be put back in use, taking care so as not to invert the tubes Do not leave the device on, inactive and unutilized for long periods of time.
glassed and silverware magnesium Hardness values not within 7°/10°F Water contains other minerals (Fe,etc.) a specialized technician Insufficient drying Wash/rinse temperature too low Defective motor, resistances, etc.
