Instruction for Use

68
CLEANING THE OVEN AND ACCESSORIES
•
After every use, let the oven cool down sufficiently then clean it to
prevent the build-up of baked-on food residues.
•
For stubborn dirt, use a specific oven cleaning product following the
instructions given on the package.
•
Clean the outside of the oven with a sponge and tepid water.
• Do not use abrasives, steel wool, electric steam cleaners or
inflammable products.
•
Do not use abrasive materials or substances for cleaning GLASS
panels, as this may damage them.
•
Wash the accessories in a dishwasher or in the sink, using an oven
cleaner.
ATTENTION: it is advisable to use protective gloves for the
following operations.
How to remove the oven door
Take great care when performing the operations described below.
The hinges “
A
” have two movable U bolts “
B
”.
When the U bolts “
B
” are raised, the hinges are uncoupled from their
seats.
•
After doing this, lift up the door and remove towards the exterior,
holding on to the sides of the door next to the hinges.
To replace the door:
•
Slot the hinges into the grooves and open the door fully.
•
Turn the the movable U bolts “
B
” back to their initial position
before closing the door.
ATTENTION: be careful not to take off the hinge locking system
when removing the door. The hinge mechanism has a powerful
spring system.
Never immerse the door in water.
Cleaning the side grills
To remove the side guides and facilitate cleaning the inside of the oven,
push down lightly on detail “
A
” as shown.
Changing the oven lamp
1.
Disconnect the oven from the electricity supply.
2.
Unscrew the lamp cover.
3.
Change the bulb (see N.B.).
4.
Refit the lamp cover.
5.
Reconnect the electrical supply to the appliance.
N.B.
: use exclusively 25 W 230 V lamps, type E-14, T300° C, available
from After Sales Service.
Pull
Press