Instruction for Use

AKG668 Installation & Instructions for Use
24
SECURING APPLIANCE INTO
POSITION
1. To ensure the outer frame trim
is not damaged by the drill,
remove it from the appliance
before drilling the side trims.
2. Make sure the appliance is
C E N T R A L L Y located between
the base units.
3. Open the grill door and you will
see the 2 fixing holes at the top
sides of the front frame.
4. Drill through the fixing holes
into the side trims with a 3.2mm
(
1
⁄
8
”) diameter drill.
5. Secure the appliance to the
side trims with the 2 remaining
No. 8 x 12mm (Silver) self tapping
screws.
Method 1 Without Housing Unit
Sidetrim
Min.
550mm
598-602mm
715mm
692mm
50mm
Runners
17485 00 AKG668 Inst. Book 7/10/05 11:25 am Page 26