Instruction for Use

AKG668 Installation & Instructions for Use
28
If no gap occurs between the
back edge of the shelf and the
wall behind the unit, we
recommended that a gap of AT
L E A S T 30mm is made by
shortening the shelf.
INSERT THE APPLIANCE AND
SECURE INTO POSITION
Open the grill door and secure
appliance into position, using the
2 No.8 x 25mm (Silver) chipboard
screws through the front frame,
ensuring that the appliance is
centrally located.
Take care not to damage the
outer trim or the housing unit.
INSTALLING A WHIRLPOOL
HOB ABOVE THE APPLIANCE
Please refer to the installation
instructions with the hob.
If another manufacturers hob is to
be fitted above this appliance,
please refer to the manufacturer
to ascertain whether it is suitable.
Whirlpool (UK) Limited will
accept no liability for any
damage caused, if the
instructions in this booklet are
not followed.
INSTALLING A GAS HOB
ABOVE THE APPLIANCE.
You may need to fit the inlet
connector adaptor kit (supplied
with the oven) to ensure
clearance.
FRONT
OF
OVEN
BACK EDGE OF
SUPPORT SHELF
approx
80mm
Gap must be as shown above
17485 00 AKG668 Inst. Book 7/10/05 11:25 am Page 30