Instruction for Use

AKG668 Installation & Instructions for Use
6
HOW TO USE THE PROGRAMMER / CLOCK
FUNCTIONS
Cooking duration, cooking end
time, time of day, minute minder
up to 23 hours 59 minutes.
DISPLAYS
A = Automatic programme
Cookpot symbol = Duration and
manual mode
Bell symbol = Minute minder
THE PROGRAMMER ENABLES
YOU TO:
1. Set the time of day.
2. Set the minute minder for an
alarm tone to sound.
3. Set the main oven to SWITCH
OFF when the meal or dish is
ready ie. semi automatic.
4. Cancel the automatic operation
(at anytime) by selecting the
manual function. After a
programme which has been set
comes to an end, it is
automatically cancelled.
5. Set the main oven to SWITCH
ON and OFF for delayed cooking.
ie. fully automatic.
SETTING
After pressing a function button
the time required can be set with
the plus (+) and minus (-) buttons.
The counting up and down speed
increases when the buttons are
held down. If a function button is
just briefly touched and released,
the selected function is displayed
for 5 seconds. Within this time
setting may be commenced (one
hand setting). Five seconds after
releasing the function button or
after setting is completed, the
display reverts to the time of day.
When programme has been set, it
automatically starts immediately.
Selection of a function is
accompanied by an audible
signal.
Timer Display and Control Panel
17485 00 AKG668 Inst. Book 7/10/05 11:25 am Page 8