Instruction for Use

N C
M Y
INSTALLATION
Only for GERMANY, SWITZERLAND AND
AUSTRIA
A - If the worktop is made out of wood, use
the springs provided.
1. Fit the four springs
into the relative seat
under the box.
2. Make an opening in the worktop, according to
the dimensions indicated in the enclosed
product description sheet.
3. Install the cooking hob in the worktop.
B - If the worktop is made out of marble or
other materials (plastics, ceramics or stone), the
cooking hob must be fixed by means of
brackets
, to be ordered from the After-
Sales Service (code 4819 310 18528).
Electrical and mechanical
connection
x The electrical connections must comply
with local regulations.
x The data relevant to the voltage and power
absorption are indicated on the rating plate.
x The earthing of this appliance is
compulsory by law.
The manufacturer cannot be held
responsible for any injury to persons or
animals or damage to property arising
from failure to comply with these
requirements.
x When the cooking hob is installed,
provide a single-pole circuit breaker with
a contact breaking distance of at least
3 mm.
17