Instruction for Use

ManualsBrandsWhirlpool ManualsDomestic AppliancesAKM 404/NB/01

CL FR HR PY RO RS UA UY

400011091375

IMPORTANT SAFETY INSTRUCTIONS

These instructions shall also be available on website: www.whirlpool.eu

YOUR SAFETY AND THE SAFETY OF OTHERS ARE VERY IMPORTANT

This manual and the appliance itself provide important safety messages, to be read and observed at all times.

This is the safety alert symbol, pertaining to safety, which alerts users to potential hazards to themselves and others.

All safety messages will follow the safety alert symbol and either the terms:

DANGER

Indicates a hazardous situation which, if not avoided, will cause serious injury.

WARNING

Indicates a hazardous situation which, if not avoided, could cause serious injury.

All Safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are

not followed.

• The appliance must be disconnected from the power supply before carrying out any installation work.

• Installation and maintenance must be carried out by a qualied technician, in compliance with the manufacturer’s instructions and local safety regulations.

Do not repair or replace any part of the appliance unless specically stated in the user manual.

WARNING

If the information in this manual is not followed exactly, a re or explosion may result causing property damage or injury.

• Do not store or use gasoline or other ammable vapors and liquids in the vicinity of this appliance.

What to do if you smell gas:

- Do not try to light any appliance.

- Do not touch any electrical switch.

- Do not use any phone in your building.

- Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

- If you cannot reach your gas supplier, call the fire department.

- Installation and service must be performed by a qualified installer, service agency or the gas supplier.

- Use appliance in well ventilated rooms only.

The electrical and gas connections must comply with local regulations.

• The appliance must be disconnected from the power supply before carrying out any installation work.

• Installation and maintenance must be carried out by a qualied technician, in compliance with the manufacturer’s instructions and local safety regulations.

Do not repair or replace any part of the appliance unless specically stated in the user manual.

• Regulations require that the appliance is earthed.

• The appliance (class 3) is designed solely for private household use for cooking food. Do not use this appliance as a space heater to heat or warm the

room. Doing so may result in carbon monoxide poisoning and overheating of the hob. The Manufacturer declines all responsibility for inappropriate use or

incorrect setting of the controls.

• The appliance and its accessible parts may become very hot during use. During and after use, do not touch the heating elements of the appliance.

• Keep children less than 8 years of age away from the appliance and supervise them to ensure they do not play with it.

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand hazards involved. Cleaning

and user maintenance shall not be made by children without supervision.

• Overheated oils and fats catch re easily. Never leave the appliance unattended when cooking with fat and oil.

• In case of hotplate glass breakage:

- Shut immediately off all burners and any electrical heating element and isolate the appliance from the power supply.

- Do not touch the appliance surface.

- Do not use the appliance.

• The appliance is not intended to be operated by means of an external timer or separate remote control system.

• Do not use steam cleaners.

• Unattended cooking on a hot with fat or oil can be dangerous and may result in re. NEVER try to extinguish a re with water, but switch off the appliance

and then cover ame, e.g. with a lid or a re blanket.

• Danger of re: do not store items on the cooking surfaces.

• The power cable must be long enough for connecting the appliance, once tted in its housing, to the power supply

• Use only exible or rigid metal hose for gas connection.

• If necessary, the electrical power cable must be replaced exclusively with a power cable having identical characteristics to the original supplied by manufacturer

(type H05V2V2-F 90°C or H05RR-F). This operation must be performed by a qualied electrician.

• The manufacturer cannot be held responsible for any injury to persons or animals or damage to property arising from failure to comply with these requirements.

• Do not use multiple plug adapters or extension cords.

• Do not pull the power supply cord in order to unplug the appliance.

• The electrical components must not be accessible to the user after installation.

BUILT-IN GAS HOB

Summary of content (7 pages)

PAGE 1
EN CL BUILT-IN GAS HOB FR HR PY RO RS UA UY IMPORTANT SAFETY INSTRUCTIONS These instructions shall also be available on website: www.whirlpool.eu YOUR SAFETY AND THE SAFETY OF OTHERS ARE VERY IMPORTANT This manual and the appliance itself provide important safety messages, to be read and observed at all times. This is the safety alert symbol, pertaining to safety, which alerts users to potential hazards to themselves and others.
PAGE 2
• • • • • • • • Do not touch the appliance with any wet part of the body and do not operate it when barefoot. The use of a gas appliance produces heat and humidity in the room. Make sure the room is well-ventilated, or install an extractor hood with exhaust duct. In case of prolonged use, additional ventilation may be necessary (by opening a window or increasing the hood extraction speed). After use, make sure the knobs are in off position and close the main gas supply cock or the gas cylinder valve.
PAGE 3
ASSEMBLY After having cleaned the perimeter surface, apply the supplied gasket to the hob as shown in the figure. Position the hob in the worktop opening made respecting the dimensions indicated in the Instruction. NOTE: the power supply cable must be long enough to permit its upward extraction. To secure the hob, use the brackets (A) provided with it.
PAGE 4
REFERENCE TO LOCAL REGULATIONS CL HR PY RO RS UA UY Ensure that the installation and gas connections are performed by a qualified technician, following the manufacturer’s instructions and in compliance with current local safety regulations.
PAGE 5
CLEANING THE HOB PARTS • • • • • • Grids, burner caps and burners can be removed to be cleaned. Clean them by hand with warm water and non-abrasive detergent, removing any food residues and checking that none of the burner openings is clogged. Rinse and dry. Refit burners and burner caps correctly in the respective housings. When replacing the grids, make sure that the panstand area is aligned with the burner.
PAGE 6
PRATICAL ADVICE FOR USING THE BURNERS This hob has burners of different diameters. For better burner performance, please stick to the following rules: • use pots and pans with bottoms the same width as that of the burners or slightly larger (see table on the right); • only use flat-bottomed pots and pans; • use the correct amount of water for cooking foods and keep the pot covered; • make sure pots on the grates do not protrude beyond the edge of the hob; only on the multi-ring burner.
PAGE 7
INJECTORS TABLE Type of gas used Type of burner Injector Rated marking thermal flow rate Rated Reduced heat consumption capacity kW 128 B 3.00 286 l/h 0.60 Semi-rapid 95 1.65 157 l/h 0.35 Rapid 87 3.00 218 g/h 0.60 Semi-rapid 67 1.65 120 g/h 0.35 Rapid 87 3.00 214 g/h 0.60 Semi-rapid 67 1.65 118 g/h 0.35 Rapid 128 B 3.00 286 l/h 0.60 Semi-rapid 95 1.65 157 l/h 0.35 LIQUEFIED PETROLEUM GAS (Butane) G30 (Propane) G31 Rapid Semi-rapid 87 67 3.00 1.