Instruction for Use

10
• To make the most of your new appliances read the
users instructions carefully and keep them on
hand for consultation in the future.
Cooktop
• The cooktop must be set into a worktop
between 20 mm and 50 mm thick. There must
be nothing between the cooktop and the oven
(cross rails, brackets, etc.).
• If the cooktop is to be installed next to a
column unit, leave a distance of at least
100 mm from the edge of the cooktop to the
side of the column unit.
• Cut an opening in the worktop of the dimensions
shown in the Product Description Sheet supplied
separately.
N.B.: Remove the protective film before installing the
cooktop.
• If the worktop is made of wood, use the supplied
spring clips and screws.
1. Position the 4 clips (D) as shown and at the
specified dimensions
2. Secure the clips using screws (E).
3. Fit the cooktop into the worktop.
• If the worktop is made of marble, ceramics,
natural stone, etc., the cooktop must be secured
with brackets (F) code 4819 404 78697 (to be
requested from After-Sales Service).
1. Fit the cooktop into the worktop.
2. Position the 4 brackets (F) as shown in the figure,
in accordance with the thickness of the worktop.
3. Fix the 4 screws (G) in holes (H).
BEFORE USING THE GLASS CERAMIC HOB
INSTALLATION
1gb59055.fm5 Page 10 Monday, November 11, 2002 6:54 PM