Health & Safety and Installation guide
EN ENGLISH Health and Safety guide Installation guide 2 3 6
SAFETY INSTRUCTIONS IMPORTANT TO BE READ AND OBSERVED Before using the appliance read these safety instructions. Keep them for future reference. These instructions and the appliance itself provide important safety warnings, to be observed at all times. The manufacturer declines any liability for failure to observe these safety instructions, for inapropriate use of the appliance or incorrect setting of controls.
ELECTRICAL WARNINGS For installation to comply with current safety regulations, an omnipolar switch with minimum contact gap of 3 mm is required and the appliance must be earthed. If the power cable is damaged, replace with an identical one. The power cable must only be replaced by a qualified technician in compliance with the manufacturer instruction and current safety regulations. Contact an authorized service center.
EN SAFEGUARDING THE ENVIRONMENT DISPOSAL OF PACKAGING MATERIALS The packaging material is 100% recyclable and is marked with the recycle symbol . The various parts of the packaging must therefore be disposed of responsibility and in full compliance with local authority regulations governing waste disposal.
x2 90°C 6
EN 20 423 557 97 478 595 89° max 525 570 5 4 595 549 min 560 min 560 560 600 40 560 583+2 40 5 7
= 001 8 = x2 4 0 0 010 9 0 4 015 Printed in Italy