Instruction for Use

108
Removing the oven door (for cleaning)
1.
Open the oven door.
2.
Press hinge catches (
A
) forwards.
3.
Lift the catches until they engage and then remove
the door.
4.
While you are cleaning the oven, ensure you do
not disengage the hinge retainer catches.
5.
Refit the oven door by following the above steps in
reverse order.
Dropping the grill element to clean the oven roof
(depending on model)
•
Do not attempt to clean the oven until it is cool.
1.
To clean the oven roof, pull out the grill element
and lower it as far as it will go.
2.
Clean the oven roof and then return the grill
element to its original position.
Changing the oven lamp
1.
Disconnect the oven from electrical supply.
2.
Unscrew the lamp cover.
3.
Change the lamp (see N.B.).
4.
Refit the lamp cover.
5.
Reconnect the electrical supply.
Changing the lateral lamp (depending on model)
1.
Disconnect the oven from electrical supply.
2.
Remove the left hand side grid.
3.
Use a screwdriver to prize off the lamp cover.
4.
Remove the bulb (see N.B) from the ceramic
holder. Fit the new bulb using plastic gloves, or
degrease it with alcohol.
5.
Reposition the lamp cover and press it against the
oven wall until it clicks into place.
6.
Refit the side grid.
7.
Reconnect the power supply.
N.B:
Use exclusively 20 W, 12 V, G4 type, T300° C
lamps only, available from After-Sales Service.
.
CLEANING THE OVEN AND ACCESSORIES