Instruction for Use

101
Cooktop
• The cooktop must be set into a worktop
between 20 mm and 50 mm thick.
There must be nothing between the cooktop
and the oven (cross rails, brackets, etc.).
• If the cooktop is to be installed next to a
column unit, leave a distance of at least 100mm
from the edge of the cooktop to the side of the
column unit.
•
Cut an opening in the worktop of the dimensions
shown in the Product Description Sheet supplied
separately.
•
If not already present, fit the supplied seal to the
cooktop flange after cleaning the contact area as
shown in the figure.
Cooktop with electric hotplates
• If the worktop is made of wood, fit the supplied
clips.
1.
Position the 4 spring clips
(B)
and fit them in their
locations on the underside of the cooktop.
2.
Fit the cooktop into the worktop.
• If the worktop is made of marble, plastic,
ceramics, natural stone, etc.,
the cooktop must
be secured with brackets
(C)
code 4819 310
18528 (to be requested from After Sales Service).
1.
Position the brackets over the holes and secure
them with the supplied screws.
2.
Fit the cooktop into the worktop.
Glass-ceramic cooktop
N.B.:
Remove the protective film before installing the
cooktop.
• If the worktop is made of wood,
use the supplied
spring clips and screws.
1.
Position the 4 clips
(D)
as shown and at the
specified dimensions.
2.
Secure the clips using screws
(E).
3.
Fit the cooktop into the worktop.
• If the worktop is made of marble, plastic,
ceramics, natural stone, etc.
, the cooktop must
be secured with brackets
(F)
code 4819 404 78697
(to be requested from After Sales Service).
1.
Fit the cooktop into the worktop.
2.
Position the 4 brackets
(F)
as shown in the figure,
in accordance with the thickness of the worktop.
3.
Fix the 4 screws
(G)
in holes
(H).
INSTALLATION