EN Instruction on mounting and use
EN - Instruction on mounting and use Regularly clean all stubborn surface dirt to avoid grease build up. Remove and clean or change the filter regularly. • Never flame cook food (flambé) under the appliance. Using free flames might cause fire. • The discharge air must not be discharged in ducts that are being used to discharge combustion fumes from gas heaters or heaters using any other combustible materials. The appliance must have its own dedicated discharge outlet.
of the type of installation to make. Caution! In some models the rear hole duct is not easily accessible, even when the tap (if mounted) is removed, in this case remove the plastic piece E1 or E2 that is blocking the hole duct, by unwinding using pliers and cutter. Check that the filter/suction selector (inside the cooker hood) G is in the suction (A) position. the weight of the hood. Do not tile, grout or silicone this appliance to the wall. Surface mounting only.
• Sponge filter should be washed with hot soapy water once a month and replaced every 5 to 6 washes. Metallic filter must be cleaned once a month, with non abrasive detergents, by hand or in dishwasher on low temperature and short cycle. When washed in a dishwasher, the grease filter may discolour slightly, but this does not affect its filtering capacity. In order to remove the grease filter open the grill via the P hooks and free the R1 or R2 stoppers.