Installation Instructions

5019 318 33157
AKR 631-666-812-966
AKR 943-948-952-995-996

Maintenance
ALWAYS disconnect the hood from the mains before
performing maintenance.
Wash the grease filter and the carbon filter in a
dishwasher once a month, at the highest possible
temperature, using normal dishwasher detergent. It is
recommended to wash the filters on the their own.
After washing, reactivate the carbon filter by drying it in
the oven at 100 °C for 10 minutes. Fit a new carbon filter
every 3 years.
Remove the grease filters - Fig. 1: push the spring release
handle backwards (f1) then remove the filter downwards
(f2).
Clean the perimeter extraction panel (if provided) as
often as the grease filter, using a cloth and a mild liquid
detergent.
Never use abrasive substances.
Clean the sensor plate regularly.
Replacing bulbs
1. Use a small screwdriver or any other suitable tool to
prise off (m-Fig. 1) the lamp cover (p-Fig.1).
2. Remove the burnt-out bulb.
Use max 20 W halogen bulbs only, taking care not to
touch them with your hands.
3. Close the lighting unit (snap-on).
Fitting the carbon filter:
1. Remove the grease filter (f1/f2 - Fig. 1).
2. Remove the filter holder by turning the knobs
(g - Fig. 2) through.
3. Fit the carbon filter (i - Fig. 2) in the filter holder
(h - Fig.2).
Reverse the above procedure to re-fit the filter holder and
grease filter.
Fig. 2
f3
* Only present on some models
Fig. 1
IF NL E PGBD GR
31833157.fm Page 10 Friday, April 1, 2005 5:04 PM