GB User and maintenance manual
IMPORTANT SAFETY INSTRUCTIONS These instructions shall also be available on website: docs.whirlpool.eu YOUR SAFETY AND THAT OF OTHERS IS HIGHLY IMPORTANT. This manual and the appliance itself provide important safety warnings, to be read and observed at all times. This is the attention symbol, pertaining to safety, which alerts users to potential risks to themselves and others.
• Children must be supervised to ensure they do not play with the appliance. • When drilling through a wall or the ceiling, pay attention not to damage electric connections and/or pipes. • The ventilation ducts must always discharge to the outside. • Exhaust air must not be vented through a flue used for removal of fumes produced by appliances burning gas or other fuels, but must have a separate outlet. All national regulations governing extraction of fumes must be observed.
INSTALLATION After unpacking the appliance, check for any transport damage. In the event of problems, contact the dealer or your nearest After-sales Service. To prevent any damage, only remove the appliance from its polystyrene foam packaging at the time of installation. PREPARING FOR INSTALLATION WARNING: this is a heavy product; the hood should only be lifted and installed by two or more people.
TROUBLESHOOTING GUIDE The appliance does not work: • Check for the presence of mains electrical power and if the appliance is connected to the electrical supply; • Turn off the appliance and restart it to see if the fault persists. The hood’s suction level is not sufficient: • Check the suction speed and adjust as necessary; • Check that the filters are clean; • Check the air vents for any obstructions.
MATERIALS SUPPLIED Remove all the components from the packets. Check that all the components are included. • Hood assembled with motor and lamps installed. • Flue support bracket • Assembly template • Filter/s • Instruction manual • 1 - adapter Torx T10 • 1 - adapter Torx T20 • 2 - washers • 6 - plugs 8 x 40 mm • 6 - screws 5 x 45 mm • 2 - screws 2.9 x 6.5 mm • 2 - screws 3 x 9 mm INSTALLATION – PRELIMINARY ASSEMBLY INSTRUCTIONS The hood is designed for use in “Extractor version” or in “Filter version”.
DESCRIPTION AND USE OF THE HOOD 1. Control panel. a. Light switch. b. Extraction and minimum extraction speed ON/OFF switch. c. Medium extraction speed switch. d. Maximum extraction speed switch. 2. Grease filter 3. Grease filter release handle 4. Halogen bulb 5. Steam deflector 6. Telescopic flue 7. Air outlet (for filter version only) MAINTENANCE WARNING: - use safety gloves. - disconnect the appliance from the mains power supply.
Fig.
Printed in Italy 08/2017 400011173288 GB