Instruction for Use
GB6
CLEANING
WARNING:
-Never use steam cleaning equipment.
- Disconnect the appliance from the power supply.
IMPORTANT: do not use corrosive or abrasive detergents. If any of these products accidentally comes into contact with the appliance, clean
immediately with a damp cloth.
• Clean the surfaces with a damp cloth. If it is very dirty, add a few drops of washing up detergent to the water. Finish o with a dry cloth.
IMPORTANT: do not use abrasive sponges or metallic scrapers or scourers. Over time, these can ruin the enamel surface.
• Use detergents specically designed for cleaning the appliance and follow the manufacturer instructions.
IMPORTANT: clean the lters at least monthly to remove any oil or grease residuals.
MAINTENANCE
WARNING:
- use protective gloves.
- disconnect the appliance from the power supply.
GREASE FILTERS
The metal grease lter has an unlimited life and should be cleaned once a month by hand or in a dishwasher at low
temperature and with a short cycle. Cleaning in a dishwasher may cause discoloring of the grease lter, but its ltering
eciency is unaected.
Pull out the steam deector.
Pull out the handle to remove the lter.
Wash the lter and leave it to dry, proceeding in reverse order to ret
REPLACING LAMPS
IMPORTANT: check the type of lamp is suitable for your particular model of appliance.
Replace the lamp with an identical one as indicated on the specications label or next to the lamp itself, on the
hood
1. Disconnect the hood from the household power supply.
2. Open the steam deector and remove the metal grease lters
3. Remove the burnt-out lamp and t a new one.
Lamp Power(W) Socket Voltage(V)
Dimension
(mm)
ILCOS D Code
(according IEC
61231)
7 E14 220-240
825 (Light color)
37(Diameter)
FBB-7/825-
220/240-E14-37
4. Ret the metal grease lters