Instruction for Use

GB10
1. Control panel.
2. Grease filter (above the perimeter suction filter).
3. Halogen bulbs.
4. Telescopic chimney.
5. Perimeter suction panel.
Control panel
a. ON/OFF light key
b. Motor ON/OFF key and minimum speed selection (suction power).
c. Medium speed selection key (power and suction)
d. Maximum speed selection key (power and suction)
USING THE HOOD
- Disconnect the appliance from the power supply
Perimeter extraction panel cleaning
Removal:
Pull the panel (FRONT) firmly downwards.
Cleaning:
The extraction panel must be cleaned as often as the grease filter, using a rag moistened with neutral
liquid detergent.
Do not use products containing abrasives. DO NOT USE ALCOHOL!
Fitting:
The panel must be fixed at the front, in the special pins on the hood surface.
IMPORTANT: Always make sure the panel is firmly fixed in place.
IMPORTANT:
MAINTENANCE
abcd