GB User and maintenance manual
IMPORTANT SAFETY INSTRUCTIONS These instructions are also available on the website: docs.whirlpool.eu YOUR SAFETY AND THAT OF OTHERS IS HIGHLY IMPORTANT. This manual and the appliance itself provide important safety warnings, to be read and observed at all times. This is the attention symbol, pertaining to safety, which alerts users to potential risks to themselves and others.
• When drilling through a wall or the ceiling, pay attention not to damage electric connections and/or pipes. • The ventilation ducts must always discharge to the outside. • Exhaust air must not be vented through a flue used for removal of fumes produced by appliances burning gas or other fuels, but must have a separate outlet. All national regulations governing extraction of fumes must be observed.
INSTALLATION After unpacking the appliance, check for any transport damage. In the event of problems, contact the dealer or your nearest After-sales Service. To prevent any damage, only remove the appliance from its polystyrene foam packaging at the time of installation. PREPARING FOR INSTALLATION WARNING: this is a heavy product; the hood should only be lifted and installed by two or more people.
-- The symbol on the product or on the accompanying documentation indicates that it should not be treated as domestic waste but must be taken to an appropriate collection centre for the recycling of electrical and electronic equipment. Scrapping of household appliances • This appliance is manufactured with recyclable or reusable materials. Dispose of it in accordance with local waste disposal regulations. Before scrapping, cut off the power supply cable.
MAINTENANCE WARNING: - use safety gloves. - disconnect the appliance from the mains power supply. GREASE FILTERS The metal grease filter has an unlimited life and should be cleaned once a month by hand or in a dishwasher at low temperature and with a short cycle. Cleaning in a dishwasher may cause discoloring of the grease filter, but its filtering efficiency is unaffected. Pull out the steam deflector. Pull out the handle to remove the filter.
MATERIALS SUPPLIED Remove all the components from the packets. Check that all the components are included. • Hood assembled with motor, lamps and grease filters installed. • Instructions for assembly and use • 1 power supply cable • 1 allen key • 1 cable clamp • 2 brackets for steam deflector slideout stroke adjustment • 3 screws 3.5x9.5 • 4 screws 4.
INSTALLATION – ASSEMBLY INSTRUCTIONS The instructions below, to be carried out in the order in which they are numbered, refer to the figures (with the same step numbers) given on the last pages of this manual. 1. Position the wall unit shelf at a height of 14 cm from the bottom. 2-3-4. Position the drilling template on the bottom of the shelf, drill the 4 Ø 5mm side holes and prepare the central opening for the air vent. 5. Fit the check valve for fumes to the hood’s fumes outlet. 6.
DESCRIPTION AND USE OF THE HOOD 1. 2. 3. 4. 5. 6. Control panel Grease filter Grease filter spring release handles Lighting Pull-out steam deflector Extractor unit body a. Light ON/OFF switch b. OFF c. Speed 1 d.
1
2 3 4
5 6
Ø 130mm 113.
4x Ø 4,2x35 9
10 2x Ø 3,5x9,5 OK! 11
12 13
14 15
Printed in Italy 02/2017 400011097670 GB