Instruction for Use

42
Oven not working
•
Switch the oven off and then on again to see
if the problem persists.
•
Check for the presence of mains electrical
power.
•
Check that the oven selector is not on
position
“0”
.
•
If the electronic display shows the message
“STOP”,
press the button
2
to reset the oven
and then set the clock (see the Programmer
Description Sheet supplied separately).
•
If the electronic display shows the message
“Fxx”
, contact the After-Sales Service,
quoting the error code displayed.
Before contacting After-Sales Service:
1.
Try to solve the problem
(see “Troubleshooting Guide”).
2.
Turn off the appliance and restart it to see if
the fault is repeated.
If after the above checks the fault still occurs,
get in touch with the nearest After-Sales
Service.
Please give:
•
The nature of the problem.
•
The exact type and model.
•
The service number (number after the word
Service on the rating plate), located on the
right hand edge of the oven cavity (visible
when the oven door is open). The service
number is also indicated on the guarantee
booklet.
•
Your complete address (including postal
code) and phone number.
•
These appliances are designed to come into
contact with foodstuffs and they are
constructed in compliance with
Directive 89/109/EEC.
•
The appliances are designed solely for use
as a domestic cooking appliances. Any other
use of the appliances (e.g. for room heating)
is considered as improper use and potentially
dangerous.
•
These appliances are designed, built and
sold in compliance with:
- the safety requirements of “Low Voltage”
Directive 73/23/EEC.
- the protection requirements of EMC
Directive 89/336/EEC;
- the requirements of Directive 93/68/EEC.
TROUBLESHOOTING GUIDE
AFTER-SALES SERVICE
DECLARATION OF CONFORMITY CE