Quick Start Guide

AKZ 157 PRODUCT DESCRIPTION SHEET
FR
5019 310 53871
First-Last...
shelf positions
1. Control panel
2. Cooling fan* (not visible)
3. Top heating element (can be lowered)
4. Oven light
5. Seat for turnspit
6. Round heating element (not visible)
7. Fan
8. Bottom heating element (not visible)
9. Oven door hinges
10.Oven cool door
*N.B.:
The cooling fan switches on only when the oven has
reached a certain temperature.
After the oven switches off, the cooling fan may, however,
continue to run for a certain time to ensure proper cooling.
ACCESSORIES
Push-Push knobs
• To use this type of knob, press it in the middle.
• Turn the knob to the desired position.
• Once cooking is over, turn the knob back to the position marked by
“0”
and press it again to restore it
to its initial setting.
FOR A DESCRIPTION ON HOW TO USE THE OVEN, PLEASE REFER TO THE PROGRAMMER DESCRIPTION
SHEET.
OVEN FUNCTIONS TABLE
Function
symbol
Function
Preset
temperature /
level
Function description
(see details in the user's manual)
0OVEN OFF
--
OVEN LIGHT
- To switch on the oven light.
MLTF
(Heat Maintenance)
35C To keep a constant temperature, either 35°C or 60°C.
STATIC
200C To cook food at one shelf level. Preheating.
PASTRY
(Static + Fan)
175C To cook on two shelf levels, at the same temperature.
FAN
160C
To cook on more than one shelf level, at the same
temperature.
TURBOFAN
160C
To cook: large fruitcakes, stuffed vegetables, timbales,
poultry.
GRILL
3 To grill small pieces of meat, toast, etc....
TURBOGRILL
(Grill + Fan)
3 To grill large pieces of meat.
PROGRAMME
P1 To bake pizza, bread, focaccia.
BOOSTER
200C For fast preheating of the oven.
First
Last
• Grid
• Baking tray
•Drip tray
• Catalytic panels
• Turnspit (can be used
with the “Grill” function)
STARTING THE OVEN
When the oven is connected to the power supply for the first time, or re-connected after a power failure,
the display shows “ ”.
To start the oven:
• turn
knob 1
to
“0”
.
•press
button 2
.
The display shows “--:--”.
1. Selector knob: to choose the oven functions.
2. Button to select and confirm the different operations (operate by single presses only).
3. Knob to set: time of day, cooking time, the time at which cooking should terminate, the
temperatures and the power levels (Function
P
).
1
2
3