Quick Start Guide

AKZ 231 PRODUCT DESCRIPTION SHEET
DE AT BE
5019 310 53001
First-Last...
shelf positions
1. Control panel
2. Cooling fan* (not visible)
3. Top heating element (can be lowered)
4. Oven light
5. Round heating element (not visible)
6. Fan
7. Bottom heating element (not visible)
8. Oven dooor hinges
9. Oven cool door
*N.B.: The cooling fan switches on only when the oven or
cooktop has reached a certain temperature. The fan can run at
two speeds:
1. Full speed
2. Reduced speed
The fan speed depends on the temperature of the appliances.
After the oven and/or the cooktop switch off, the cooling fan
may, however, continue to run for a certain time to ensure
proper cooling.
ACCESSORIES
Push-push knobs
 To use this type of knob, press it in the middle.
 Turn the knob to the desired position.
 Once cooking is over, turn the knob back to the position marked by 0 and press it again to restore
it to its initial setting.
COOKTOP FUNCTIONS TABLE
FOR A DESCRIPTION ON HOW TO USE THE OVEN, PLEASE REFER TO THE PROGRAMMER DESCRIPTION SHEET.
OVEN FUNCTIONS TABLE
Function
symbol
Function
Preset
temperature/level
Function description
(see details in the users manual)
0OVEN OFF
--
OVEN LIGHT
- To switch on the oven light.
MLTF
(Heat Maintenance)
35C
To keep a constant temperature, either 35°C
or 60°C.
STATIC
200C To cook food at one shelf level. Preheating.
PASTRY
(Static + Fan)
175C
To cook on two shelf levels, at the same
temperature.
FAN
160C
To cook on more than one shelf level, at the
same temperature.
TURBOFAN
160C
To cook: large fruitcakes, stuffed vegetables,
timbales, poultry.
GRILL
3 To grill small pieces of meat, toast, etc.
TURBOGRILL
(Grill + Fan)
3 To grill large pieces of meat.
PROGRAMME
P1 To bake pizza, bread, focaccia.
BOOSTER
200C For fast preheating of the oven.
First
Last
Grid
 Baking tray
Drip tray
Function
symbol
Function
Function description
(see details in the users manual)
KEEP WARM Constant temperature, 60°C.
DUAL ZONE To extend the heated area of the second part of oval or rectangular cooking zones.
ICP To accelerate the heating of the selected cooking zone.
FAST BOILING To bring the water to the boil fast.
GENTLE HEAT Constant temperature, 35°C.
1-10 POWER LEVELS -
STARTING THE OVEN
When the oven is connected to the power supply for the first time, or re-connected after a power
failure,
the display shows  .
To start the oven:
turn
knob 1
to
0
.
press
button 2
.
The display shows --:--
.
321 4 5 6 7 8
1. Selector knob: to choose the oven functions.
2. Button to select and confirm the different operations (operate by single presses only).
3. Knob to set: time of day, cooking time, the time at which cooking should terminate,
the temperatures and the power levels (Function P).
4. Control knob for front, left cooking zone* 0 1 ... 10
5. Control knob for rear, left cooking zone* 0 1 ... 10
6. Control knob for rear, right cooking zone* 0 1 ... 10
7. Control knob for front, right cooking zone* 0 1 ... 10
8. Cooktop warning lights
*)
The cooktop control knobs are not interchangeable. After cleaning or servicing, they must be returned to their
original positions.